xref: /linux/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml (revision a1c3be890440a1769ed6f822376a3e3ab0d42994)
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Brcmstb PCIe Host Controller Device Tree Bindings
8
9maintainers:
10  - Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
11
12properties:
13  compatible:
14    items:
15      - enum:
16          - brcm,bcm2711-pcie # The Raspberry Pi 4
17          - brcm,bcm4908-pcie
18          - brcm,bcm7211-pcie # Broadcom STB version of RPi4
19          - brcm,bcm7278-pcie # Broadcom 7278 Arm
20          - brcm,bcm7216-pcie # Broadcom 7216 Arm
21          - brcm,bcm7445-pcie # Broadcom 7445 Arm
22
23  reg:
24    maxItems: 1
25
26  interrupts:
27    minItems: 1
28    maxItems: 2
29    items:
30      - description: PCIe host controller
31      - description: builtin MSI controller
32
33  interrupt-names:
34    minItems: 1
35    maxItems: 2
36    items:
37      - const: pcie
38      - const: msi
39
40  ranges:
41    minItems: 1
42    maxItems: 4
43
44  dma-ranges:
45    minItems: 1
46    maxItems: 6
47
48  clocks:
49    maxItems: 1
50
51  clock-names:
52    items:
53      - const: sw_pcie
54
55  msi-controller:
56    description: Identifies the node as an MSI controller.
57
58  msi-parent:
59    description: MSI controller the device is capable of using.
60
61  brcm,enable-ssc:
62    description: Indicates usage of spread-spectrum clocking.
63    type: boolean
64
65  aspm-no-l0s: true
66
67  brcm,scb-sizes:
68    description: u64 giving the 64bit PCIe memory
69      viewport size of a memory controller.  There may be up to
70      three controllers, and each size must be a power of two
71      with a size greater or equal to the amount of memory the
72      controller supports.  Note that each memory controller
73      may have two component regions -- base and extended -- so
74      this information cannot be deduced from the dma-ranges.
75    $ref: /schemas/types.yaml#/definitions/uint64-array
76    items:
77      minItems: 1
78      maxItems: 3
79
80required:
81  - reg
82  - ranges
83  - dma-ranges
84  - "#interrupt-cells"
85  - interrupts
86  - interrupt-names
87  - interrupt-map-mask
88  - interrupt-map
89  - msi-controller
90
91allOf:
92  - $ref: /schemas/pci/pci-bus.yaml#
93  - if:
94      properties:
95        compatible:
96          contains:
97            const: brcm,bcm4908-pcie
98    then:
99      properties:
100        resets:
101          items:
102            - description: reset controller handling the PERST# signal
103
104        reset-names:
105          items:
106            - const: perst
107
108      required:
109        - resets
110        - reset-names
111  - if:
112      properties:
113        compatible:
114          contains:
115            const: brcm,bcm7216-pcie
116    then:
117      properties:
118        resets:
119          items:
120            - description: phandle pointing to the RESCAL reset controller
121
122        reset-names:
123          items:
124            - const: rescal
125
126      required:
127        - resets
128        - reset-names
129
130unevaluatedProperties: false
131
132examples:
133  - |
134    #include <dt-bindings/interrupt-controller/irq.h>
135    #include <dt-bindings/interrupt-controller/arm-gic.h>
136
137    scb {
138            #address-cells = <2>;
139            #size-cells = <1>;
140            pcie0: pcie@7d500000 {
141                    compatible = "brcm,bcm2711-pcie";
142                    reg = <0x0 0x7d500000 0x9310>;
143                    device_type = "pci";
144                    #address-cells = <3>;
145                    #size-cells = <2>;
146                    #interrupt-cells = <1>;
147                    interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
148                                 <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
149                    interrupt-names = "pcie", "msi";
150                    interrupt-map-mask = <0x0 0x0 0x0 0x7>;
151                    interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
152                    msi-parent = <&pcie0>;
153                    msi-controller;
154                    ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>;
155                    dma-ranges = <0x42000000 0x1 0x00000000 0x0 0x40000000 0x0 0x80000000>,
156                                 <0x42000000 0x1 0x80000000 0x3 0x00000000 0x0 0x80000000>;
157                    brcm,enable-ssc;
158                    brcm,scb-sizes =  <0x0000000080000000 0x0000000080000000>;
159            };
160    };
161