1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/pci/apple,pcie.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Apple PCIe host controller 8 9maintainers: 10 - Mark Kettenis <kettenis@openbsd.org> 11 12description: | 13 The Apple PCIe host controller is a PCIe host controller with 14 multiple root ports present in Apple ARM SoC platforms, including 15 various iPhone and iPad devices and the "Apple Silicon" Macs. 16 The controller incorporates Synopsys DesigWare PCIe logic to 17 implements its root ports. But the ATU found on most DesignWare 18 PCIe host bridges is absent. 19 20 All root ports share a single ECAM space, but separate GPIOs are 21 used to take the PCI devices on those ports out of reset. Therefore 22 the standard "reset-gpios" and "max-link-speed" properties appear on 23 the child nodes that represent the PCI bridges that correspond to 24 the individual root ports. 25 26 MSIs are handled by the PCIe controller and translated into regular 27 interrupts. A range of 32 MSIs is provided. These 32 MSIs can be 28 distributed over the root ports as the OS sees fit by programming 29 the PCIe controller's port registers. 30 31properties: 32 compatible: 33 items: 34 - enum: 35 - apple,t8103-pcie 36 - apple,t8112-pcie 37 - apple,t6000-pcie 38 - const: apple,pcie 39 40 reg: 41 minItems: 3 42 maxItems: 6 43 44 reg-names: 45 minItems: 3 46 items: 47 - const: config 48 - const: rc 49 - const: port0 50 - const: port1 51 - const: port2 52 - const: port3 53 54 ranges: 55 minItems: 2 56 maxItems: 2 57 58 interrupts: 59 description: 60 Interrupt specifiers, one for each root port. 61 minItems: 1 62 maxItems: 4 63 64 msi-parent: true 65 66 msi-ranges: 67 maxItems: 1 68 69 iommu-map: true 70 iommu-map-mask: true 71 72 power-domains: 73 maxItems: 1 74 75required: 76 - compatible 77 - reg 78 - reg-names 79 - bus-range 80 - interrupts 81 - msi-controller 82 - msi-parent 83 - msi-ranges 84 85unevaluatedProperties: false 86 87allOf: 88 - $ref: /schemas/pci/pci-host-bridge.yaml# 89 - $ref: /schemas/interrupt-controller/msi-controller.yaml# 90 - if: 91 properties: 92 compatible: 93 contains: 94 const: apple,t8103-pcie 95 then: 96 properties: 97 reg: 98 maxItems: 5 99 interrupts: 100 maxItems: 3 101 102examples: 103 - | 104 #include <dt-bindings/interrupt-controller/apple-aic.h> 105 106 soc { 107 #address-cells = <2>; 108 #size-cells = <2>; 109 110 pcie0: pcie@690000000 { 111 compatible = "apple,t8103-pcie", "apple,pcie"; 112 device_type = "pci"; 113 114 reg = <0x6 0x90000000 0x0 0x1000000>, 115 <0x6 0x80000000 0x0 0x100000>, 116 <0x6 0x81000000 0x0 0x4000>, 117 <0x6 0x82000000 0x0 0x4000>, 118 <0x6 0x83000000 0x0 0x4000>; 119 reg-names = "config", "rc", "port0", "port1", "port2"; 120 121 interrupt-parent = <&aic>; 122 interrupts = <AIC_IRQ 695 IRQ_TYPE_LEVEL_HIGH>, 123 <AIC_IRQ 698 IRQ_TYPE_LEVEL_HIGH>, 124 <AIC_IRQ 701 IRQ_TYPE_LEVEL_HIGH>; 125 126 msi-controller; 127 msi-parent = <&pcie0>; 128 msi-ranges = <&aic AIC_IRQ 704 IRQ_TYPE_EDGE_RISING 32>; 129 130 iommu-map = <0x100 &dart0 1 1>, 131 <0x200 &dart1 1 1>, 132 <0x300 &dart2 1 1>; 133 iommu-map-mask = <0xff00>; 134 135 bus-range = <0 3>; 136 #address-cells = <3>; 137 #size-cells = <2>; 138 ranges = <0x43000000 0x6 0xa0000000 0x6 0xa0000000 0x0 0x20000000>, 139 <0x02000000 0x0 0xc0000000 0x6 0xc0000000 0x0 0x40000000>; 140 141 power-domains = <&ps_apcie_gp>; 142 pinctrl-0 = <&pcie_pins>; 143 pinctrl-names = "default"; 144 145 pci@0,0 { 146 device_type = "pci"; 147 reg = <0x0 0x0 0x0 0x0 0x0>; 148 reset-gpios = <&pinctrl_ap 152 0>; 149 150 #address-cells = <3>; 151 #size-cells = <2>; 152 ranges; 153 }; 154 155 pci@1,0 { 156 device_type = "pci"; 157 reg = <0x800 0x0 0x0 0x0 0x0>; 158 reset-gpios = <&pinctrl_ap 153 0>; 159 160 #address-cells = <3>; 161 #size-cells = <2>; 162 ranges; 163 }; 164 165 pci@2,0 { 166 device_type = "pci"; 167 reg = <0x1000 0x0 0x0 0x0 0x0>; 168 reset-gpios = <&pinctrl_ap 33 0>; 169 170 #address-cells = <3>; 171 #size-cells = <2>; 172 ranges; 173 }; 174 }; 175 }; 176