xref: /linux/Documentation/devicetree/bindings/pci/altr,pcie-root-port.yaml (revision 7d06015d936c861160803e020f68f413b5c3cd9d)

# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
# Copyright (C) 2015, 2019, 2024, Intel Corporation
%YAML 1.2
---
$id: http://devicetree.org/schemas/altr,pcie-root-port.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Altera PCIe Root Port

maintainers:
  - Matthew Gerlach <matthew.gerlach@linux.intel.com>

properties:
  compatible:
    description: Each family of socfpga has its own implementation of the
      PCI controller. The altr,pcie-root-port-1.0 is used for the Cyclone5
      family of chips. The Stratix10 family of chips is supported by the
      altr,pcie-root-port-2.0. The Agilex family of chips has three,
      non-register compatible, variants of PCIe Hard IP referred to as the
      F-Tile, P-Tile, and R-Tile, depending on the specific chip instance.

    enum:
      - altr,pcie-root-port-1.0
      - altr,pcie-root-port-2.0
      - altr,pcie-root-port-3.0-f-tile
      - altr,pcie-root-port-3.0-p-tile
      - altr,pcie-root-port-3.0-r-tile

  reg:
    items:
      - description: TX slave port region
      - description: Control register access region
      - description: Hard IP region
    minItems: 2

  reg-names:
    items:
      - const: Txs
      - const: Cra
      - const: Hip
    minItems: 2

  interrupts:
    maxItems: 1

  interrupt-controller: true

  interrupt-map-mask:
    items:
      - const: 0
      - const: 0
      - const: 0
      - const: 7

  interrupt-map:
    maxItems: 4

  "#interrupt-cells":
    const: 1

  msi-parent: true

required:
  - compatible
  - reg
  - reg-names
  - interrupts
  - "#interrupt-cells"
  - interrupt-controller
  - interrupt-map
  - interrupt-map-mask

allOf:
  - $ref: /schemas/pci/pci-host-bridge.yaml#
  - if:
      properties:
        compatible:
          enum:
            - altr,pcie-root-port-1.0
    then:
      properties:
        reg:
          maxItems: 2

        reg-names:
          maxItems: 2

    else:
      properties:
        reg:
          minItems: 3

        reg-names:
          minItems: 3


unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    #include <dt-bindings/interrupt-controller/irq.h>
    pcie_0: pcie@c00000000 {
        compatible = "altr,pcie-root-port-1.0";
        reg = <0xc0000000 0x20000000>,
              <0xff220000 0x00004000>;
        reg-names = "Txs", "Cra";
        interrupt-parent = <&hps_0_arm_gic_0>;
        interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
        interrupt-controller;
        #interrupt-cells = <1>;
        bus-range = <0x0 0xff>;
        device_type = "pci";
        msi-parent = <&msi_to_gic_gen_0>;
        #address-cells = <3>;
        #size-cells = <2>;
        interrupt-map-mask = <0 0 0 7>;
        interrupt-map = <0 0 0 1 &pcie_0 0 0 0 1>,
                        <0 0 0 2 &pcie_0 0 0 0 2>,
                        <0 0 0 3 &pcie_0 0 0 0 3>,
                        <0 0 0 4 &pcie_0 0 0 0 4>;
        ranges = <0x82000000 0x00000000 0x00000000 0xc0000000 0x00000000 0x10000000>,
                 <0x82000000 0x00000000 0x10000000 0xd0000000 0x00000000 0x10000000>;
    };