1# SPDX-License-Identifier: GPL-2.0 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/net/renesas,ether.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Renesas Electronics SH EtherMAC 8 9allOf: 10 - $ref: ethernet-controller.yaml# 11 12maintainers: 13 - Sergei Shtylyov <sergei.shtylyov@gmail.com> 14 15properties: 16 compatible: 17 oneOf: 18 - items: 19 - enum: 20 - renesas,gether-r8a7740 # device is a part of R8A7740 SoC 21 - renesas,gether-r8a77980 # device is a part of R8A77980 SoC 22 - renesas,ether-r7s72100 # device is a part of R7S72100 SoC 23 - renesas,ether-r7s9210 # device is a part of R7S9210 SoC 24 - items: 25 - enum: 26 - renesas,ether-r8a7778 # device is a part of R8A7778 SoC 27 - renesas,ether-r8a7779 # device is a part of R8A7779 SoC 28 - enum: 29 - renesas,rcar-gen1-ether # a generic R-Car Gen1 device 30 - items: 31 - enum: 32 - renesas,ether-r8a7742 # device is a part of R8A7742 SoC 33 - renesas,ether-r8a7743 # device is a part of R8A7743 SoC 34 - renesas,ether-r8a7745 # device is a part of R8A7745 SoC 35 - renesas,ether-r8a7790 # device is a part of R8A7790 SoC 36 - renesas,ether-r8a7791 # device is a part of R8A7791 SoC 37 - renesas,ether-r8a7793 # device is a part of R8A7793 SoC 38 - renesas,ether-r8a7794 # device is a part of R8A7794 SoC 39 - enum: 40 - renesas,rcar-gen2-ether # a generic R-Car Gen2 or RZ/G1 device 41 42 reg: 43 items: 44 - description: E-DMAC/feLic registers 45 - description: TSU registers 46 minItems: 1 47 48 interrupts: 49 maxItems: 1 50 51 '#address-cells': 52 description: number of address cells for the MDIO bus 53 const: 1 54 55 '#size-cells': 56 description: number of size cells on the MDIO bus 57 const: 0 58 59 clocks: 60 maxItems: 1 61 62 iommus: 63 maxItems: 1 64 65 power-domains: 66 maxItems: 1 67 68 resets: 69 maxItems: 1 70 71 phy-mode: true 72 73 phy-handle: true 74 75 renesas,no-ether-link: 76 type: boolean 77 description: 78 specify when a board does not provide a proper Ether LINK signal 79 80 renesas,ether-link-active-low: 81 type: boolean 82 description: 83 specify when the Ether LINK signal is active-low instead of normal 84 active-high 85 86patternProperties: 87 "@[0-9a-f]$": 88 type: object 89 90required: 91 - compatible 92 - reg 93 - interrupts 94 - phy-mode 95 - phy-handle 96 - '#address-cells' 97 - '#size-cells' 98 - clocks 99 100additionalProperties: false 101 102examples: 103 # Lager board 104 - | 105 #include <dt-bindings/clock/r8a7790-cpg-mssr.h> 106 #include <dt-bindings/interrupt-controller/arm-gic.h> 107 #include <dt-bindings/power/r8a7790-sysc.h> 108 #include <dt-bindings/gpio/gpio.h> 109 110 ethernet@ee700000 { 111 compatible = "renesas,ether-r8a7790", "renesas,rcar-gen2-ether"; 112 reg = <0xee700000 0x400>; 113 interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; 114 clocks = <&cpg CPG_MOD 813>; 115 power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; 116 resets = <&cpg 813>; 117 phy-mode = "rmii"; 118 phy-handle = <&phy1>; 119 renesas,ether-link-active-low; 120 #address-cells = <1>; 121 #size-cells = <0>; 122 123 phy1: ethernet-phy@1 { 124 compatible = "ethernet-phy-id0022.1537", 125 "ethernet-phy-ieee802.3-c22"; 126 reg = <1>; 127 interrupt-parent = <&irqc0>; 128 interrupts = <0 IRQ_TYPE_LEVEL_LOW>; 129 reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>; 130 }; 131 }; 132