xref: /linux/Documentation/devicetree/bindings/net/renesas,ether.yaml (revision 0526b56cbc3c489642bd6a5fe4b718dea7ef0ee8)
1# SPDX-License-Identifier: GPL-2.0
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/net/renesas,ether.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Renesas Electronics SH EtherMAC
8
9allOf:
10  - $ref: ethernet-controller.yaml#
11
12maintainers:
13  - Sergei Shtylyov <sergei.shtylyov@gmail.com>
14
15properties:
16  compatible:
17    oneOf:
18      - items:
19          - enum:
20              - renesas,gether-r8a7740   # device is a part of R8A7740 SoC
21              - renesas,gether-r8a77980  # device is a part of R8A77980 SoC
22              - renesas,ether-r7s72100   # device is a part of R7S72100 SoC
23              - renesas,ether-r7s9210    # device is a part of R7S9210 SoC
24      - items:
25          - enum:
26              - renesas,ether-r8a7778    # device is a part of R8A7778 SoC
27              - renesas,ether-r8a7779    # device is a part of R8A7779 SoC
28          - enum:
29              - renesas,rcar-gen1-ether  # a generic R-Car Gen1 device
30      - items:
31          - enum:
32              - renesas,ether-r8a7742    # device is a part of R8A7742 SoC
33              - renesas,ether-r8a7743    # device is a part of R8A7743 SoC
34              - renesas,ether-r8a7745    # device is a part of R8A7745 SoC
35              - renesas,ether-r8a7790    # device is a part of R8A7790 SoC
36              - renesas,ether-r8a7791    # device is a part of R8A7791 SoC
37              - renesas,ether-r8a7793    # device is a part of R8A7793 SoC
38              - renesas,ether-r8a7794    # device is a part of R8A7794 SoC
39          - enum:
40              - renesas,rcar-gen2-ether  # a generic R-Car Gen2 or RZ/G1 device
41
42  reg:
43    items:
44      - description: E-DMAC/feLic registers
45      - description: TSU registers
46    minItems: 1
47
48  interrupts:
49    maxItems: 1
50
51  '#address-cells':
52    description: number of address cells for the MDIO bus
53    const: 1
54
55  '#size-cells':
56    description: number of size cells on the MDIO bus
57    const: 0
58
59  clocks:
60    maxItems: 1
61
62  power-domains:
63    maxItems: 1
64
65  resets:
66    maxItems: 1
67
68  phy-mode: true
69
70  phy-handle: true
71
72  renesas,no-ether-link:
73    type: boolean
74    description:
75      specify when a board does not provide a proper Ether LINK signal
76
77  renesas,ether-link-active-low:
78    type: boolean
79    description:
80      specify when the Ether LINK signal is active-low instead of normal
81      active-high
82
83patternProperties:
84  "^ethernet-phy@[0-9a-f]$":
85    type: object
86    $ref: ethernet-phy.yaml#
87
88required:
89  - compatible
90  - reg
91  - interrupts
92  - phy-mode
93  - phy-handle
94  - '#address-cells'
95  - '#size-cells'
96  - clocks
97
98additionalProperties: false
99
100examples:
101  # Lager board
102  - |
103    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
104    #include <dt-bindings/interrupt-controller/arm-gic.h>
105    #include <dt-bindings/power/r8a7790-sysc.h>
106    #include <dt-bindings/gpio/gpio.h>
107
108    ethernet@ee700000 {
109        compatible = "renesas,ether-r8a7790", "renesas,rcar-gen2-ether";
110        reg = <0xee700000 0x400>;
111        interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
112        clocks = <&cpg CPG_MOD 813>;
113        power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
114        resets = <&cpg 813>;
115        phy-mode = "rmii";
116        phy-handle = <&phy1>;
117        renesas,ether-link-active-low;
118        #address-cells = <1>;
119        #size-cells = <0>;
120
121        phy1: ethernet-phy@1 {
122            compatible = "ethernet-phy-id0022.1537",
123                         "ethernet-phy-ieee802.3-c22";
124            reg = <1>;
125            interrupt-parent = <&irqc0>;
126            interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
127            micrel,led-mode = <1>;
128            reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>;
129        };
130    };
131