xref: /linux/Documentation/devicetree/bindings/net/qca,ar71xx.yaml (revision 702648721db590b3425c31ade294000e18808345) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/net/qca,ar71xx.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: QCA AR71XX MAC
8
9allOf:
10  - $ref: ethernet-controller.yaml#
11
12maintainers:
13  - Oleksij Rempel <o.rempel@pengutronix.de>
14
15properties:
16  compatible:
17    oneOf:
18      - items:
19          - enum:
20              - qca,ar7100-eth   # Atheros AR7100
21              - qca,ar7240-eth   # Atheros AR7240
22              - qca,ar7241-eth   # Atheros AR7241
23              - qca,ar7242-eth   # Atheros AR7242
24              - qca,ar9130-eth   # Atheros AR9130
25              - qca,ar9330-eth   # Atheros AR9330
26              - qca,ar9340-eth   # Atheros AR9340
27              - qca,qca9530-eth  # Qualcomm Atheros QCA9530
28              - qca,qca9550-eth  # Qualcomm Atheros QCA9550
29              - qca,qca9560-eth  # Qualcomm Atheros QCA9560
30
31  reg:
32    maxItems: 1
33
34  interrupts:
35    maxItems: 1
36
37  clocks:
38    items:
39      - description: MAC main clock
40      - description: MDIO clock
41
42  clock-names:
43    items:
44      - const: eth
45      - const: mdio
46
47  resets:
48    items:
49      - description: MAC reset
50      - description: MDIO reset
51
52  reset-names:
53    items:
54      - const: mac
55      - const: mdio
56
57  mdio:
58    $ref: mdio.yaml#
59    unevaluatedProperties: false
60
61required:
62  - compatible
63  - reg
64  - interrupts
65  - phy-mode
66  - clocks
67  - clock-names
68  - resets
69  - reset-names
70
71unevaluatedProperties: false
72
73examples:
74  # Lager board
75  - |
76    eth0: ethernet@19000000 {
77        compatible = "qca,ar9330-eth";
78        reg = <0x19000000 0x200>;
79        interrupts = <4>;
80        resets = <&rst 9>, <&rst 22>;
81        reset-names = "mac", "mdio";
82        clocks = <&pll 1>, <&pll 2>;
83        clock-names = "eth", "mdio";
84        phy-mode = "mii";
85        phy-handle = <&phy_port4>;
86    };
87
88    eth1: ethernet@1a000000 {
89        compatible = "qca,ar9330-eth";
90        reg = <0x1a000000 0x200>;
91        interrupts = <5>;
92        resets = <&rst 13>, <&rst 23>;
93        reset-names = "mac", "mdio";
94        clocks = <&pll 1>, <&pll 2>;
95        clock-names = "eth", "mdio";
96
97        phy-mode = "gmii";
98
99        fixed-link {
100            speed = <1000>;
101            full-duplex;
102        };
103
104        mdio {
105            #address-cells = <1>;
106            #size-cells = <0>;
107
108            switch10: switch@10 {
109                compatible = "qca,ar9331-switch";
110                reg = <0x10>;
111                resets = <&rst 8>;
112                reset-names = "switch";
113
114                interrupt-parent = <&miscintc>;
115                interrupts = <12>;
116
117                interrupt-controller;
118                #interrupt-cells = <1>;
119
120                ports {
121                    #address-cells = <1>;
122                    #size-cells = <0>;
123
124                    switch_port0: port@0 {
125                        reg = <0x0>;
126                        ethernet = <&eth1>;
127
128                        phy-mode = "gmii";
129
130                        fixed-link {
131                            speed = <1000>;
132                            full-duplex;
133                        };
134                    };
135
136                    switch_port1: port@1 {
137                        reg = <0x1>;
138                        phy-handle = <&phy_port0>;
139                        phy-mode = "internal";
140                    };
141
142                    switch_port2: port@2 {
143                        reg = <0x2>;
144                        phy-handle = <&phy_port1>;
145                        phy-mode = "internal";
146                    };
147
148                    switch_port3: port@3 {
149                        reg = <0x3>;
150                        phy-handle = <&phy_port2>;
151                        phy-mode = "internal";
152                    };
153
154                    switch_port4: port@4 {
155                        reg = <0x4>;
156                        phy-handle = <&phy_port3>;
157                        phy-mode = "internal";
158                    };
159                };
160
161                mdio {
162                    #address-cells = <1>;
163                    #size-cells = <0>;
164
165                    interrupt-parent = <&switch10>;
166
167                    phy_port0: ethernet-phy@0 {
168                        reg = <0x0>;
169                        interrupts = <0>;
170                    };
171
172                    phy_port1: ethernet-phy@1 {
173                        reg = <0x1>;
174                        interrupts = <0>;
175                    };
176
177                    phy_port2: ethernet-phy@2 {
178                        reg = <0x2>;
179                        interrupts = <0>;
180                    };
181
182                    phy_port3: ethernet-phy@3 {
183                        reg = <0x3>;
184                        interrupts = <0>;
185                    };
186
187                    phy_port4: ethernet-phy@4 {
188                        reg = <0x4>;
189                        interrupts = <0>;
190                    };
191                };
192            };
193        };
194    };
195