1Hisilicon hix5hd2 gmac controller 2 3Required properties: 4- compatible: should be "hisilicon,hix5hd2-gmac". 5- reg: specifies base physical address(s) and size of the device registers. 6 The first region is the MAC register base and size. 7 The second region is external interface control register. 8- interrupts: should contain the MAC interrupt. 9- #address-cells: must be <1>. 10- #size-cells: must be <0>. 11- phy-mode: see ethernet.txt [1]. 12- phy-handle: see ethernet.txt [1]. 13- mac-address: see ethernet.txt [1]. 14- clocks: clock phandle and specifier pair. 15 16- PHY subnode: inherits from phy binding [2] 17 18[1] Documentation/devicetree/bindings/net/ethernet.txt 19[2] Documentation/devicetree/bindings/net/phy.txt 20 21Example: 22 gmac0: ethernet@f9840000 { 23 compatible = "hisilicon,hix5hd2-gmac"; 24 reg = <0xf9840000 0x1000>,<0xf984300c 0x4>; 25 interrupts = <0 71 4>; 26 #address-cells = <1>; 27 #size-cells = <0>; 28 phy-mode = "mii"; 29 phy-handle = <&phy2>; 30 mac-address = [00 00 00 00 00 00]; 31 clocks = <&clock HIX5HD2_MAC0_CLK>; 32 33 phy2: ethernet-phy@2 { 34 reg = <2>; 35 }; 36 }; 37