xref: /linux/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt (revision ca55b2fef3a9373fcfc30f82fd26bc7fccbda732) 
1Hisilicon hip04 Ethernet Controller
2
3* Ethernet controller node
4
5Required properties:
6- compatible: should be "hisilicon,hip04-mac".
7- reg: address and length of the register set for the device.
8- interrupts: interrupt for the device.
9- port-handle: <phandle port channel>
10	phandle, specifies a reference to the syscon ppe node
11	port, port number connected to the controller
12	channel, recv channel start from channel * number (RX_DESC_NUM)
13- phy-mode: see ethernet.txt [1].
14
15Optional properties:
16- phy-handle: see ethernet.txt [1].
17
18[1] Documentation/devicetree/bindings/net/ethernet.txt
19
20
21* Ethernet ppe node:
22Control rx & tx fifos of all ethernet controllers.
23Have 2048 recv channels shared by all ethernet controllers, only if no overlap.
24Each controller's recv channel start from channel * number (RX_DESC_NUM).
25
26Required properties:
27- compatible: "hisilicon,hip04-ppe", "syscon".
28- reg: address and length of the register set for the device.
29
30
31* MDIO bus node:
32
33Required properties:
34
35- compatible: should be "hisilicon,hip04-mdio".
36- Inherits from MDIO bus node binding [2]
37[2] Documentation/devicetree/bindings/net/phy.txt
38
39Example:
40	mdio {
41		compatible = "hisilicon,hip04-mdio";
42		reg = <0x28f1000 0x1000>;
43		#address-cells = <1>;
44		#size-cells = <0>;
45
46		phy0: ethernet-phy@0 {
47			compatible = "ethernet-phy-ieee802.3-c22";
48			reg = <0>;
49			marvell,reg-init = <18 0x14 0 0x8001>;
50		};
51
52		phy1: ethernet-phy@1 {
53			compatible = "ethernet-phy-ieee802.3-c22";
54			reg = <1>;
55			marvell,reg-init = <18 0x14 0 0x8001>;
56		};
57	};
58
59	ppe: ppe@28c0000 {
60		compatible = "hisilicon,hip04-ppe", "syscon";
61		reg = <0x28c0000 0x10000>;
62	};
63
64	fe: ethernet@28b0000 {
65		compatible = "hisilicon,hip04-mac";
66		reg = <0x28b0000 0x10000>;
67		interrupts = <0 413 4>;
68		phy-mode = "mii";
69		port-handle = <&ppe 31 0>;
70	};
71
72	ge0: ethernet@2800000 {
73		compatible = "hisilicon,hip04-mac";
74		reg = <0x2800000 0x10000>;
75		interrupts = <0 402 4>;
76		phy-mode = "sgmii";
77		port-handle = <&ppe 0 1>;
78		phy-handle = <&phy0>;
79	};
80
81	ge8: ethernet@2880000 {
82		compatible = "hisilicon,hip04-mac";
83		reg = <0x2880000 0x10000>;
84		interrupts = <0 410 4>;
85		phy-mode = "sgmii";
86		port-handle = <&ppe 8 2>;
87		phy-handle = <&phy1>;
88	};
89