xref: /linux/Documentation/devicetree/bindings/net/ethernet-phy.yaml (revision c50ad6dbf6cc1d1671a3cd5618b3a52c495b78ca) 
1# SPDX-License-Identifier: GPL-2.0
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/net/ethernet-phy.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Ethernet PHY Generic Binding
8
9maintainers:
10  - Andrew Lunn <andrew@lunn.ch>
11  - Florian Fainelli <f.fainelli@gmail.com>
12  - Heiner Kallweit <hkallweit1@gmail.com>
13
14# The dt-schema tools will generate a select statement first by using
15# the compatible, and second by using the node name if any. In our
16# case, the node name is the one we want to match on, while the
17# compatible is optional.
18select:
19  properties:
20    $nodename:
21      pattern: "^ethernet-phy(@[a-f0-9]+)?$"
22
23  required:
24    - $nodename
25
26properties:
27  $nodename:
28    pattern: "^ethernet-phy(@[a-f0-9]+)?$"
29
30  compatible:
31    oneOf:
32      - const: ethernet-phy-ieee802.3-c22
33        description: PHYs that implement IEEE802.3 clause 22
34      - const: ethernet-phy-ieee802.3-c45
35        description: PHYs that implement IEEE802.3 clause 45
36      - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
37        description:
38          If the PHY reports an incorrect ID (or none at all) then the
39          compatible list may contain an entry with the correct PHY ID
40          in the above form.
41          The first group of digits is the 16 bit Phy Identifier 1
42          register, this is the chip vendor OUI bits 3:18. The
43          second group of digits is the Phy Identifier 2 register,
44          this is the chip vendor OUI bits 19:24, followed by 10
45          bits of a vendor specific ID.
46      - items:
47          - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
48          - const: ethernet-phy-ieee802.3-c22
49      - items:
50          - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
51          - const: ethernet-phy-ieee802.3-c45
52
53  reg:
54    minimum: 0
55    maximum: 31
56    description:
57      The ID number for the PHY.
58
59  interrupts:
60    maxItems: 1
61
62  max-speed:
63    enum:
64      - 10
65      - 100
66      - 1000
67      - 2500
68      - 5000
69      - 10000
70      - 20000
71      - 25000
72      - 40000
73      - 50000
74      - 56000
75      - 100000
76      - 200000
77    description:
78      Maximum PHY supported speed in Mbits / seconds.
79
80  broken-turn-around:
81    $ref: /schemas/types.yaml#definitions/flag
82    description:
83      If set, indicates the PHY device does not correctly release
84      the turn around line low at the end of a MDIO transaction.
85
86  enet-phy-lane-swap:
87    $ref: /schemas/types.yaml#definitions/flag
88    description:
89      If set, indicates the PHY will swap the TX/RX lanes to
90      compensate for the board being designed with the lanes
91      swapped.
92
93  eee-broken-100tx:
94    $ref: /schemas/types.yaml#definitions/flag
95    description:
96      Mark the corresponding energy efficient ethernet mode as
97      broken and request the ethernet to stop advertising it.
98
99  eee-broken-1000t:
100    $ref: /schemas/types.yaml#definitions/flag
101    description:
102      Mark the corresponding energy efficient ethernet mode as
103      broken and request the ethernet to stop advertising it.
104
105  eee-broken-10gt:
106    $ref: /schemas/types.yaml#definitions/flag
107    description:
108      Mark the corresponding energy efficient ethernet mode as
109      broken and request the ethernet to stop advertising it.
110
111  eee-broken-1000kx:
112    $ref: /schemas/types.yaml#definitions/flag
113    description:
114      Mark the corresponding energy efficient ethernet mode as
115      broken and request the ethernet to stop advertising it.
116
117  eee-broken-10gkx4:
118    $ref: /schemas/types.yaml#definitions/flag
119    description:
120      Mark the corresponding energy efficient ethernet mode as
121      broken and request the ethernet to stop advertising it.
122
123  eee-broken-10gkr:
124    $ref: /schemas/types.yaml#definitions/flag
125    description:
126      Mark the corresponding energy efficient ethernet mode as
127      broken and request the ethernet to stop advertising it.
128
129  phy-is-integrated:
130    $ref: /schemas/types.yaml#definitions/flag
131    description:
132      If set, indicates that the PHY is integrated into the same
133      physical package as the Ethernet MAC. If needed, muxers
134      should be configured to ensure the integrated PHY is
135      used. The absence of this property indicates the muxers
136      should be configured so that the external PHY is used.
137
138  resets:
139    maxItems: 1
140
141  reset-names:
142    const: phy
143
144  reset-gpios:
145    maxItems: 1
146    description:
147      The GPIO phandle and specifier for the PHY reset signal.
148
149  reset-assert-us:
150    description:
151      Delay after the reset was asserted in microseconds. If this
152      property is missing the delay will be skipped.
153
154  reset-deassert-us:
155    description:
156      Delay after the reset was deasserted in microseconds. If
157      this property is missing the delay will be skipped.
158
159  sfp:
160    $ref: /schemas/types.yaml#definitions/phandle
161    description:
162      Specifies a reference to a node representing a SFP cage.
163
164required:
165  - reg
166
167examples:
168  - |
169    ethernet {
170        #address-cells = <1>;
171        #size-cells = <0>;
172
173        ethernet-phy@0 {
174            compatible = "ethernet-phy-id0141.0e90", "ethernet-phy-ieee802.3-c45";
175            interrupt-parent = <&PIC>;
176            interrupts = <35 1>;
177            reg = <0>;
178
179            resets = <&rst 8>;
180            reset-names = "phy";
181            reset-gpios = <&gpio1 4 1>;
182            reset-assert-us = <1000>;
183            reset-deassert-us = <2000>;
184        };
185    };
186