xref: /linux/Documentation/devicetree/bindings/net/ethernet-phy.yaml (revision 6dcb8bf9a1d7f6d137a17b76177cd67e9b8e023d) 
1# SPDX-License-Identifier: GPL-2.0
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/net/ethernet-phy.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Ethernet PHY Generic Binding
8
9maintainers:
10  - Andrew Lunn <andrew@lunn.ch>
11  - Florian Fainelli <f.fainelli@gmail.com>
12  - Heiner Kallweit <hkallweit1@gmail.com>
13
14# The dt-schema tools will generate a select statement first by using
15# the compatible, and second by using the node name if any. In our
16# case, the node name is the one we want to match on, while the
17# compatible is optional.
18select:
19  properties:
20    $nodename:
21      pattern: "^ethernet-phy(@[a-f0-9]+)?$"
22
23  required:
24    - $nodename
25
26properties:
27  $nodename:
28    pattern: "^ethernet-phy(@[a-f0-9]+)?$"
29
30  compatible:
31    oneOf:
32      - const: ethernet-phy-ieee802.3-c22
33        description: PHYs that implement IEEE802.3 clause 22
34      - const: ethernet-phy-ieee802.3-c45
35        description: PHYs that implement IEEE802.3 clause 45
36      - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
37        description:
38          If the PHY reports an incorrect ID (or none at all) then the
39          compatible list may contain an entry with the correct PHY ID
40          in the above form.
41          The first group of digits is the 16 bit Phy Identifier 1
42          register, this is the chip vendor OUI bits 3:18. The
43          second group of digits is the Phy Identifier 2 register,
44          this is the chip vendor OUI bits 19:24, followed by 10
45          bits of a vendor specific ID.
46      - items:
47          - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
48          - const: ethernet-phy-ieee802.3-c22
49      - items:
50          - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
51          - const: ethernet-phy-ieee802.3-c45
52
53  reg:
54    minimum: 0
55    maximum: 31
56    description:
57      The ID number for the PHY.
58
59  interrupts:
60    maxItems: 1
61
62  max-speed:
63    enum:
64      - 10
65      - 100
66      - 1000
67      - 2500
68      - 5000
69      - 10000
70      - 20000
71      - 25000
72      - 40000
73      - 50000
74      - 56000
75      - 100000
76      - 200000
77    description:
78      Maximum PHY supported speed in Mbits / seconds.
79
80  broken-turn-around:
81    $ref: /schemas/types.yaml#/definitions/flag
82    description:
83      If set, indicates the PHY device does not correctly release
84      the turn around line low at end of the control phase of the
85      MDIO transaction.
86
87  enet-phy-lane-swap:
88    $ref: /schemas/types.yaml#/definitions/flag
89    description:
90      If set, indicates the PHY will swap the TX/RX lanes to
91      compensate for the board being designed with the lanes
92      swapped.
93
94  eee-broken-100tx:
95    $ref: /schemas/types.yaml#/definitions/flag
96    description:
97      Mark the corresponding energy efficient ethernet mode as
98      broken and request the ethernet to stop advertising it.
99
100  eee-broken-1000t:
101    $ref: /schemas/types.yaml#/definitions/flag
102    description:
103      Mark the corresponding energy efficient ethernet mode as
104      broken and request the ethernet to stop advertising it.
105
106  eee-broken-10gt:
107    $ref: /schemas/types.yaml#/definitions/flag
108    description:
109      Mark the corresponding energy efficient ethernet mode as
110      broken and request the ethernet to stop advertising it.
111
112  eee-broken-1000kx:
113    $ref: /schemas/types.yaml#/definitions/flag
114    description:
115      Mark the corresponding energy efficient ethernet mode as
116      broken and request the ethernet to stop advertising it.
117
118  eee-broken-10gkx4:
119    $ref: /schemas/types.yaml#/definitions/flag
120    description:
121      Mark the corresponding energy efficient ethernet mode as
122      broken and request the ethernet to stop advertising it.
123
124  eee-broken-10gkr:
125    $ref: /schemas/types.yaml#/definitions/flag
126    description:
127      Mark the corresponding energy efficient ethernet mode as
128      broken and request the ethernet to stop advertising it.
129
130  phy-is-integrated:
131    $ref: /schemas/types.yaml#/definitions/flag
132    description:
133      If set, indicates that the PHY is integrated into the same
134      physical package as the Ethernet MAC. If needed, muxers
135      should be configured to ensure the integrated PHY is
136      used. The absence of this property indicates the muxers
137      should be configured so that the external PHY is used.
138
139  resets:
140    maxItems: 1
141
142  reset-names:
143    const: phy
144
145  reset-gpios:
146    maxItems: 1
147    description:
148      The GPIO phandle and specifier for the PHY reset signal.
149
150  reset-assert-us:
151    description:
152      Delay after the reset was asserted in microseconds. If this
153      property is missing the delay will be skipped.
154
155  reset-deassert-us:
156    description:
157      Delay after the reset was deasserted in microseconds. If
158      this property is missing the delay will be skipped.
159
160  sfp:
161    $ref: /schemas/types.yaml#/definitions/phandle
162    description:
163      Specifies a reference to a node representing a SFP cage.
164
165  rx-internal-delay-ps:
166    description: |
167      RGMII Receive PHY Clock Delay defined in pico seconds.  This is used for
168      PHY's that have configurable RX internal delays.  If this property is
169      present then the PHY applies the RX delay.
170
171  tx-internal-delay-ps:
172    description: |
173      RGMII Transmit PHY Clock Delay defined in pico seconds.  This is used for
174      PHY's that have configurable TX internal delays. If this property is
175      present then the PHY applies the TX delay.
176
177required:
178  - reg
179
180additionalProperties: true
181
182examples:
183  - |
184    ethernet {
185        #address-cells = <1>;
186        #size-cells = <0>;
187
188        ethernet-phy@0 {
189            compatible = "ethernet-phy-id0141.0e90", "ethernet-phy-ieee802.3-c45";
190            interrupt-parent = <&PIC>;
191            interrupts = <35 1>;
192            reg = <0>;
193
194            resets = <&rst 8>;
195            reset-names = "phy";
196            reset-gpios = <&gpio1 4 1>;
197            reset-assert-us = <1000>;
198            reset-deassert-us = <2000>;
199        };
200    };
201