1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/net/dsa/dsa-port.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Generic DSA Switch Port 8 9maintainers: 10 - Andrew Lunn <andrew@lunn.ch> 11 - Florian Fainelli <f.fainelli@gmail.com> 12 - Vladimir Oltean <olteanv@gmail.com> 13 14description: 15 A DSA switch port is a component of a switch that manages one MAC, and can 16 pass Ethernet frames. It can act as a stanadard Ethernet switch port, or have 17 DSA-specific functionality. 18 19$ref: /schemas/net/ethernet-switch-port.yaml# 20 21properties: 22 reg: 23 items: 24 - description: Port number 25 26 label: 27 description: 28 Describes the label associated with this port, which will become 29 the netdev name 30 $ref: /schemas/types.yaml#/definitions/string 31 32 link: 33 description: 34 Should be a list of phandles to other switch's DSA port. This 35 port is used as the outgoing port towards the phandle ports. The 36 full routing information must be given, not just the one hop 37 routes to neighbouring switches 38 $ref: /schemas/types.yaml#/definitions/phandle-array 39 items: 40 maxItems: 1 41 42 ethernet: 43 description: 44 Should be a phandle to a valid Ethernet device node. This host 45 device is what the switch port is connected to 46 $ref: /schemas/types.yaml#/definitions/phandle 47 48 dsa-tag-protocol: 49 description: 50 Instead of the default, the switch will use this tag protocol if 51 possible. Useful when a device supports multiple protocols and 52 the default is incompatible with the Ethernet device. 53 enum: 54 - dsa 55 - edsa 56 - ocelot 57 - ocelot-8021q 58 - rtl8_4 59 - rtl8_4t 60 - seville 61 62# CPU and DSA ports must have phylink-compatible link descriptions 63if: 64 oneOf: 65 - required: [ ethernet ] 66 - required: [ link ] 67then: 68 allOf: 69 - required: 70 - phy-mode 71 - oneOf: 72 - required: 73 - fixed-link 74 - required: 75 - phy-handle 76 - required: 77 - managed 78 79additionalProperties: true 80 81... 82