xref: /linux/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml (revision e7d759f31ca295d589f7420719c311870bb3166f)
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/net/brcm,mdio-mux-iproc.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: MDIO bus multiplexer found in Broadcom iProc based SoCs.
8
9maintainers:
10  - Florian Fainelli <f.fainelli@gmail.com>
11
12description:
13  This MDIO bus multiplexer defines buses that could be internal as well as
14  external to SoCs and could accept MDIO transaction compatible to C-22 or
15  C-45 Clause. When child bus is selected, one needs to select these two
16  properties as well to generate desired MDIO transaction on appropriate bus.
17
18allOf:
19  - $ref: /schemas/net/mdio-mux.yaml#
20
21properties:
22  compatible:
23    const: brcm,mdio-mux-iproc
24
25  reg:
26    maxItems: 1
27
28  clocks:
29    maxItems: 1
30    description: core clock driving the MDIO block
31
32
33required:
34  - compatible
35  - reg
36
37unevaluatedProperties: false
38
39examples:
40  - |
41    mdio_mux_iproc: mdio-mux@66020000 {
42        compatible = "brcm,mdio-mux-iproc";
43        reg = <0x66020000 0x250>;
44        #address-cells = <1>;
45        #size-cells = <0>;
46
47        mdio@0 {
48           reg = <0x0>;
49           #address-cells = <1>;
50           #size-cells = <0>;
51
52           pci_phy0: pci-phy@0 {
53              compatible = "brcm,ns2-pcie-phy";
54              reg = <0x0>;
55              #phy-cells = <0>;
56           };
57        };
58
59        mdio@7 {
60           reg = <0x7>;
61           #address-cells = <1>;
62           #size-cells = <0>;
63
64           pci_phy1: pci-phy@0 {
65              compatible = "brcm,ns2-pcie-phy";
66              reg = <0x0>;
67              #phy-cells = <0>;
68           };
69        };
70
71        mdio@10 {
72           reg = <0x10>;
73           #address-cells = <1>;
74           #size-cells = <0>;
75
76           gphy0: eth-phy@10 {
77              reg = <0x10>;
78           };
79        };
80    };
81