xref: /linux/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml (revision e6a901a00822659181c93c86d8bbc2a17779fddc) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/mtd/st,stm32-fmc2-nand.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: STMicroelectronics Flexible Memory Controller 2 (FMC2)
8
9maintainers:
10  - Christophe Kerello <christophe.kerello@foss.st.com>
11
12properties:
13  compatible:
14    enum:
15      - st,stm32mp15-fmc2
16      - st,stm32mp1-fmc2-nfc
17      - st,stm32mp25-fmc2-nfc
18
19  reg:
20    minItems: 6
21    maxItems: 12
22
23  interrupts:
24    maxItems: 1
25
26  dmas:
27    items:
28      - description: tx DMA channel
29      - description: rx DMA channel
30      - description: ecc DMA channel
31
32  dma-names:
33    items:
34      - const: tx
35      - const: rx
36      - const: ecc
37
38patternProperties:
39  "^nand@[a-f0-9]$":
40    type: object
41    $ref: raw-nand-chip.yaml
42    properties:
43      nand-ecc-step-size:
44        const: 512
45
46      nand-ecc-strength:
47        enum: [1, 4, 8]
48
49    unevaluatedProperties: false
50
51allOf:
52  - $ref: nand-controller.yaml#
53
54  - if:
55      properties:
56        compatible:
57          contains:
58            const: st,stm32mp15-fmc2
59    then:
60      properties:
61        reg:
62          items:
63            - description: Registers
64            - description: Chip select 0 data
65            - description: Chip select 0 command
66            - description: Chip select 0 address space
67            - description: Chip select 1 data
68            - description: Chip select 1 command
69            - description: Chip select 1 address space
70
71        clocks:
72          maxItems: 1
73
74        resets:
75          maxItems: 1
76
77      required:
78        - clocks
79
80  - if:
81      properties:
82        compatible:
83          contains:
84            const: st,stm32mp1-fmc2-nfc
85    then:
86      properties:
87        reg:
88          items:
89            - description: Chip select 0 data
90            - description: Chip select 0 command
91            - description: Chip select 0 address space
92            - description: Chip select 1 data
93            - description: Chip select 1 command
94            - description: Chip select 1 address space
95
96  - if:
97      properties:
98        compatible:
99          contains:
100            const: st,stm32mp25-fmc2-nfc
101    then:
102      properties:
103        reg:
104          items:
105            - description: Chip select 0 data
106            - description: Chip select 0 command
107            - description: Chip select 0 address space
108            - description: Chip select 1 data
109            - description: Chip select 1 command
110            - description: Chip select 1 address space
111            - description: Chip select 2 data
112            - description: Chip select 2 command
113            - description: Chip select 2 address space
114            - description: Chip select 3 data
115            - description: Chip select 3 command
116            - description: Chip select 3 address space
117
118required:
119  - compatible
120  - reg
121  - interrupts
122
123unevaluatedProperties: false
124
125examples:
126  - |
127    #include <dt-bindings/interrupt-controller/arm-gic.h>
128    #include <dt-bindings/clock/stm32mp1-clks.h>
129    #include <dt-bindings/reset/stm32mp1-resets.h>
130
131    nand-controller@58002000 {
132        compatible = "st,stm32mp15-fmc2";
133        reg = <0x58002000 0x1000>,
134              <0x80000000 0x1000>,
135              <0x88010000 0x1000>,
136              <0x88020000 0x1000>,
137              <0x81000000 0x1000>,
138              <0x89010000 0x1000>,
139              <0x89020000 0x1000>;
140        interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
141        dmas = <&mdma1 20 0x2 0x12000a02 0x0 0x0>,
142               <&mdma1 20 0x2 0x12000a08 0x0 0x0>,
143               <&mdma1 21 0x2 0x12000a0a 0x0 0x0>;
144        dma-names = "tx", "rx", "ecc";
145        clocks = <&rcc FMC_K>;
146        resets = <&rcc FMC_R>;
147        #address-cells = <1>;
148        #size-cells = <0>;
149
150        nand@0 {
151            reg = <0>;
152            nand-on-flash-bbt;
153            #address-cells = <1>;
154            #size-cells = <1>;
155        };
156    };
157
158...
159