xref: /linux/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml (revision c532de5a67a70f8533d495f8f2aaa9a0491c3ad0) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/mtd/amlogic,meson-nand.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs
8
9allOf:
10  - $ref: nand-controller.yaml
11
12maintainers:
13  - liang.yang@amlogic.com
14
15properties:
16  compatible:
17    enum:
18      - amlogic,meson-gxl-nfc
19      - amlogic,meson-axg-nfc
20
21  reg:
22    maxItems: 2
23
24  reg-names:
25    items:
26      - const: nfc
27      - const: emmc
28
29  interrupts:
30    maxItems: 1
31
32  clocks:
33    minItems: 2
34
35  clock-names:
36    items:
37      - const: core
38      - const: device
39
40patternProperties:
41  "^nand@[0-7]$":
42    type: object
43    $ref: raw-nand-chip.yaml
44    properties:
45      reg:
46        minimum: 0
47        maximum: 1
48
49      nand-ecc-mode:
50        const: hw
51
52      nand-ecc-step-size:
53        enum: [512, 1024]
54
55      nand-ecc-strength:
56        enum: [8, 16, 24, 30, 40, 50, 60]
57        description: |
58          The ECC configurations that can be supported are as follows.
59            meson-gxl-nfc 8, 16, 24, 30, 40, 50, 60
60            meson-axg-nfc 8
61
62      nand-rb:
63        maxItems: 1
64        items:
65          maximum: 0
66
67      amlogic,boot-pages:
68        $ref: /schemas/types.yaml#/definitions/uint32
69        description:
70          Number of pages starting from offset 0, where a special ECC
71          configuration must be used because it is accessed by the ROM
72          code. This ECC configuration uses 384 bytes data blocks.
73          Also scrambling mode is enabled for such pages.
74
75      amlogic,boot-page-step:
76        $ref: /schemas/types.yaml#/definitions/uint32
77        description:
78          Interval between pages, accessed by the ROM code. For example
79          we have 8 pages [0, 7]. Pages 0,2,4,6 are accessed by the
80          ROM code, so this field will be 2 (e.g. every 2nd page). Rest
81          of pages - 1,3,5,7 are read/written without this mode.
82
83    unevaluatedProperties: false
84
85    dependencies:
86      nand-ecc-strength: [nand-ecc-step-size]
87      nand-ecc-step-size: [nand-ecc-strength]
88      amlogic,boot-pages: [nand-is-boot-medium, "amlogic,boot-page-step"]
89      amlogic,boot-page-step: [nand-is-boot-medium, "amlogic,boot-pages"]
90
91
92required:
93  - compatible
94  - reg
95  - interrupts
96  - clocks
97  - clock-names
98
99unevaluatedProperties: false
100
101examples:
102  - |
103    #include <dt-bindings/clock/axg-clkc.h>
104    #include <dt-bindings/interrupt-controller/arm-gic.h>
105    nand-controller@ffe07800 {
106      compatible = "amlogic,meson-axg-nfc";
107      reg = <0xffe07800 0x100>, <0xffe07000 0x800>;
108      reg-names = "nfc", "emmc";
109      interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
110      clocks = <&clkc CLKID_SD_EMMC_C>,  <&clkc CLKID_FCLK_DIV2>;
111      clock-names = "core", "device";
112
113      pinctrl-0 = <&nand_pins>;
114      pinctrl-names = "default";
115
116      #address-cells = <1>;
117      #size-cells = <0>;
118
119      nand@0 {
120        reg = <0>;
121        nand-rb = <0>;
122      };
123    };
124
125...
126