1# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/mmc/socionext,uniphier-sd.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: UniPhier SD/SDIO/eMMC controller 8 9maintainers: 10 - Masahiro Yamada <yamada.masahiro@socionext.com> 11 12properties: 13 compatible: 14 description: version 2.91, 3.1, 3.1.1, respectively 15 enum: 16 - socionext,uniphier-sd-v2.91 17 - socionext,uniphier-sd-v3.1 18 - socionext,uniphier-sd-v3.1.1 19 20 reg: 21 maxItems: 1 22 23 interrupts: 24 maxItems: 1 25 26 clocks: 27 maxItems: 1 28 29 dmas: 30 maxItems: 1 31 32 dma-names: 33 const: rx-tx 34 35 reset-names: 36 description: | 37 There are three reset signals at maximum 38 host: mandatory for all variants 39 bridge: exist only for version 2.91 40 hw: optional. exist if eMMC hw reset line is available 41 oneOf: 42 - const: host 43 - items: 44 - const: host 45 - const: bridge 46 - items: 47 - const: host 48 - const: hw 49 - items: 50 - const: host 51 - const: bridge 52 - const: hw 53 54 resets: 55 minItems: 1 56 maxItems: 3 57 58 socionext,syscon-uhs-mode: 59 $ref: /schemas/types.yaml#/definitions/phandle-array 60 items: 61 - items: 62 - description: phandle to syscon that configures UHS mode 63 - description: ID of SD instance 64 description: 65 A phandle to syscon with one argument that configures UHS mode. 66 The argument is the ID of SD instance. 67 68allOf: 69 - $ref: mmc-controller.yaml 70 71 - if: 72 properties: 73 compatible: 74 contains: 75 const: socionext,uniphier-sd-v2.91 76 then: 77 properties: 78 reset-names: 79 contains: 80 const: bridge 81 else: 82 properties: 83 reset-names: 84 not: 85 contains: 86 const: bridge 87 88required: 89 - compatible 90 - reg 91 - interrupts 92 - clocks 93 - reset-names 94 - resets 95 96unevaluatedProperties: false 97 98examples: 99 - | 100 sd: mmc@5a400000 { 101 compatible = "socionext,uniphier-sd-v2.91"; 102 reg = <0x5a400000 0x200>; 103 interrupts = <0 76 4>; 104 pinctrl-names = "default", "uhs"; 105 pinctrl-0 = <&pinctrl_sd>; 106 pinctrl-1 = <&pinctrl_sd_uhs>; 107 clocks = <&mio_clk 0>; 108 reset-names = "host", "bridge"; 109 resets = <&mio_rst 0>, <&mio_rst 3>; 110 dma-names = "rx-tx"; 111 dmas = <&dmac 4>; 112 bus-width = <4>; 113 cap-sd-highspeed; 114 sd-uhs-sdr12; 115 sd-uhs-sdr25; 116 sd-uhs-sdr50; 117 }; 118