1* TI OMAP SDHCI Controller 2 3Refer to mmc.txt for standard MMC bindings. 4 5Required properties: 6- compatible: Should be "ti,dra7-sdhci" for DRA7 and DRA72 controllers 7 Should be "ti,k2g-sdhci" for K2G 8- ti,hwmods: Must be "mmc<n>", <n> is controller instance starting 1 9 (Not required for K2G). 10- pinctrl-names: Should be subset of "default", "hs", "sdr12", "sdr25", "sdr50", 11 "ddr50-rev11", "sdr104-rev11", "ddr50", "sdr104", 12 "ddr_1_8v-rev11", "ddr_1_8v" or "ddr_3_3v", "hs200_1_8v-rev11", 13 "hs200_1_8v", 14- pinctrl-<n> : Pinctrl states as described in bindings/pinctrl/pinctrl-bindings.txt 15 16Example: 17 mmc1: mmc@4809c000 { 18 compatible = "ti,dra7-sdhci"; 19 reg = <0x4809c000 0x400>; 20 ti,hwmods = "mmc1"; 21 bus-width = <4>; 22 vmmc-supply = <&vmmc>; /* phandle to regulator node */ 23 }; 24