xref: /linux/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml (revision 2dfe48a85a0702cce70a35b1d9c13d7671ba5fa6) 
1# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/mmc/samsung,exynos-dw-mshc.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title:
8  Samsung Exynos SoC specific extensions to the Synopsys Designware Mobile
9  Storage Host Controller
10
11maintainers:
12  - Jaehoon Chung <jh80.chung@samsung.com>
13  - Krzysztof Kozlowski <krzk@kernel.org>
14
15properties:
16  compatible:
17    oneOf:
18      - enum:
19          - axis,artpec8-dw-mshc
20          - samsung,exynos4210-dw-mshc
21          - samsung,exynos4412-dw-mshc
22          - samsung,exynos5250-dw-mshc
23          - samsung,exynos5420-dw-mshc
24          - samsung,exynos5420-dw-mshc-smu
25          - samsung,exynos7-dw-mshc
26          - samsung,exynos7-dw-mshc-smu
27      - items:
28          - enum:
29              - samsung,exynos5433-dw-mshc-smu
30              - samsung,exynos7885-dw-mshc-smu
31              - samsung,exynos850-dw-mshc-smu
32          - const: samsung,exynos7-dw-mshc-smu
33
34  reg:
35    maxItems: 1
36
37  interrupts:
38    maxItems: 1
39
40  clocks:
41    maxItems: 2
42    description:
43      Handle to "biu" and "ciu" clocks for the
44      bus interface unit clock and the card interface unit clock.
45
46  clock-names:
47    items:
48      - const: biu
49      - const: ciu
50
51  samsung,dw-mshc-ciu-div:
52    $ref: /schemas/types.yaml#/definitions/uint32
53    minimum: 0
54    maximum: 7
55    description:
56      The divider value for the card interface unit (ciu) clock.
57
58  samsung,dw-mshc-ddr-timing:
59    $ref: /schemas/types.yaml#/definitions/uint32-array
60    items:
61      - description: CIU clock phase shift value for tx mode
62        minimum: 0
63        maximum: 7
64      - description: CIU clock phase shift value for rx mode
65        minimum: 0
66        maximum: 7
67    description:
68      The value of CUI clock phase shift value in transmit mode and CIU clock
69      phase shift value in receive mode for double data rate mode operation.
70      See also samsung,dw-mshc-hs400-timing property.
71
72  samsung,dw-mshc-hs400-timing:
73    $ref: /schemas/types.yaml#/definitions/uint32-array
74    items:
75      - description: CIU clock phase shift value for tx mode
76        minimum: 0
77        maximum: 7
78      - description: CIU clock phase shift value for rx mode
79        minimum: 0
80        maximum: 7
81    description: |
82      The value of CIU TX and RX clock phase shift value for HS400 mode
83      operation.
84      Valid values for SDR and DDR CIU clock timing::
85        - valid value for tx phase shift and rx phase shift is 0 to 7.
86        - when CIU clock divider value is set to 3, all possible 8 phase shift
87          values can be used.
88        - if CIU clock divider value is 0 (that is divide by 1), both tx and rx
89          phase shift clocks should be 0.
90      If missing, values from samsung,dw-mshc-ddr-timing property are used.
91
92  samsung,dw-mshc-sdr-timing:
93    $ref: /schemas/types.yaml#/definitions/uint32-array
94    items:
95      - description: CIU clock phase shift value for tx mode
96        minimum: 0
97        maximum: 7
98      - description: CIU clock phase shift value for rx mode
99        minimum: 0
100        maximum: 7
101    description:
102      The value of CIU clock phase shift value in transmit mode and CIU clock
103      phase shift value in receive mode for single data rate mode operation.
104      See also samsung,dw-mshc-hs400-timing property.
105
106  samsung,read-strobe-delay:
107    $ref: /schemas/types.yaml#/definitions/uint32
108    description:
109      RCLK (Data strobe) delay to control HS400 mode (Latency value for delay
110      line in Read path). If missing, default from hardware is used.
111
112required:
113  - compatible
114  - reg
115  - interrupts
116  - clocks
117  - clock-names
118  - samsung,dw-mshc-ddr-timing
119  - samsung,dw-mshc-sdr-timing
120
121allOf:
122  - $ref: synopsys-dw-mshc-common.yaml#
123  - if:
124      properties:
125        compatible:
126          contains:
127            enum:
128              - samsung,exynos5250-dw-mshc
129              - samsung,exynos5420-dw-mshc
130              - samsung,exynos7-dw-mshc
131              - samsung,exynos7-dw-mshc-smu
132              - axis,artpec8-dw-mshc
133    then:
134      required:
135        - samsung,dw-mshc-ciu-div
136
137unevaluatedProperties: false
138
139examples:
140  - |
141    #include <dt-bindings/clock/exynos5420.h>
142    #include <dt-bindings/interrupt-controller/arm-gic.h>
143
144    mmc@12220000 {
145        compatible = "samsung,exynos5420-dw-mshc";
146        interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
147        #address-cells = <1>;
148        #size-cells = <0>;
149        reg = <0x12220000 0x1000>;
150        clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
151        clock-names = "biu", "ciu";
152        fifo-depth = <0x40>;
153        card-detect-delay = <200>;
154        samsung,dw-mshc-ciu-div = <3>;
155        samsung,dw-mshc-sdr-timing = <0 4>;
156        samsung,dw-mshc-ddr-timing = <0 2>;
157        pinctrl-names = "default";
158        pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_wp &sd2_bus1 &sd2_bus4>;
159        bus-width = <4>;
160        cap-sd-highspeed;
161        max-frequency = <200000000>;
162        vmmc-supply = <&ldo19_reg>;
163        vqmmc-supply = <&ldo13_reg>;
164        sd-uhs-sdr50;
165        sd-uhs-sdr104;
166        sd-uhs-ddr50;
167    };
168