xref: /linux/Documentation/devicetree/bindings/mfd/twl6040.txt (revision ca55b2fef3a9373fcfc30f82fd26bc7fccbda732)
1Texas Instruments TWL6040 family
2
3The TWL6040s are 8-channel high quality low-power audio codecs providing audio,
4vibra and GPO functionality on OMAP4+ platforms.
5They are connected ot the host processor via i2c for commands, McPDM for audio
6data and commands.
7
8Required properties:
9- compatible : "ti,twl6040" for twl6040, "ti,twl6041" for twl6041
10- reg: must be 0x4b for i2c address
11- interrupts: twl6040 has one interrupt line connecteded to the main SoC
12- interrupt-parent: The parent interrupt controller
13- gpio-controller:
14- #gpio-cells = <1>: twl6040 provides GPO lines.
15- twl6040,audpwron-gpio: Power on GPIO line for the twl6040
16
17- vio-supply: Regulator for the twl6040 VIO supply
18- v2v1-supply: Regulator for the twl6040 V2V1 supply
19
20Optional properties, nodes:
21- enable-active-high: To power on the twl6040 during boot.
22- clocks: phandle to the clk32k clock provider
23- clock-names: Must be "clk32k"
24
25Vibra functionality
26Required properties:
27- vddvibl-supply: Regulator for the left vibra motor
28- vddvibr-supply: Regulator for the right vibra motor
29- vibra { }: Configuration section for vibra parameters containing the following
30	     properties:
31- ti,vibldrv-res: Resistance parameter for left driver
32- ti,vibrdrv-res: Resistance parameter for right driver
33- ti,viblmotor-res: Resistance parameter for left motor
34- ti,viblmotor-res: Resistance parameter for right motor
35
36Optional properties within vibra { } section:
37- vddvibl_uV: If the vddvibl default voltage need to be changed
38- vddvibr_uV: If the vddvibr default voltage need to be changed
39
40Example:
41&i2c1 {
42	twl6040: twl@4b {
43		compatible = "ti,twl6040";
44
45		interrupts = <0 119 4>;
46		interrupt-parent = <&gic>;
47		twl6040,audpwron-gpio = <&gpio4 31 0>;
48
49		vio-supply = <&v1v8>;
50		v2v1-supply = <&v2v1>;
51		enable-active-high;
52
53		/* regulators for vibra motor */
54		vddvibl-supply = <&vbat>;
55		vddvibr-supply = <&vbat>;
56
57		vibra {
58			/* Vibra driver, motor resistance parameters */
59			ti,vibldrv-res = <8>;
60			ti,vibrdrv-res = <3>;
61			ti,viblmotor-res = <10>;
62			ti,vibrmotor-res = <10>;
63		};
64	};
65};
66
67/include/ "twl6040.dtsi"
68