xref: /linux/Documentation/devicetree/bindings/mfd/tps6507x.txt (revision b4db9f840283caca0d904436f187ef56a9126eaa)
1TPS6507x Power Management Integrated Circuit
2
3Required properties:
4- compatible: "ti,tps6507x"
5- reg: I2C slave address
6- regulators: This is the list of child nodes that specify the regulator
7  initialization data for defined regulators. Not all regulators for the
8  given device need to be present. The definition for each of these nodes
9  is defined using the standard binding for regulators found at
10  Documentation/devicetree/bindings/regulator/regulator.txt.
11  The regulator is matched with the regulator-compatible.
12
13  The valid regulator-compatible values are:
14  tps6507x: vdcdc1, vdcdc2, vdcdc3, vldo1, vldo2
15- xxx-supply: Input voltage supply regulator.
16  These entries are required if regulators are enabled for a device.
17  Missing of these properties can cause the regulator registration
18  fails.
19  If some of input supply is powered through battery or always-on
20  supply then also it is require to have these parameters with proper
21  node handle of always on power supply.
22  tps6507x:
23       vindcdc1_2-supply: VDCDC1 and VDCDC2 input.
24       vindcdc3-supply  : VDCDC3 input.
25       vldo1_2-supply   : VLDO1 and VLDO2 input.
26
27Regulator Optional properties:
28- defdcdc_default: It's property of DCDC2 and DCDC3 regulators.
29			0: If defdcdc pin of DCDC2/DCDC3 is pulled to GND.
30			1: If defdcdc pin of DCDC2/DCDC3 is driven HIGH.
31  If this property is not defined, it defaults to 0 (not enabled).
32
33Example:
34
35	pmu: tps6507x@48 {
36		compatible = "ti,tps6507x";
37		reg = <0x48>;
38
39		vindcdc1_2-supply = <&vbat>;
40		vindcdc3-supply = <...>;
41		vinldo1_2-supply = <...>;
42
43		regulators {
44			#address-cells = <1>;
45			#size-cells = <0>;
46
47			vdcdc1_reg: regulator@0 {
48				regulator-compatible = "VDCDC1";
49				reg = <0>;
50				regulator-min-microvolt = <3150000>;
51				regulator-max-microvolt = <3450000>;
52				regulator-always-on;
53				regulator-boot-on;
54			};
55			vdcdc2_reg: regulator@1 {
56				regulator-compatible = "VDCDC2";
57				reg = <1>;
58				regulator-min-microvolt = <1710000>;
59				regulator-max-microvolt = <3450000>;
60				regulator-always-on;
61				regulator-boot-on;
62				defdcdc_default = <1>;
63			};
64			vdcdc3_reg: regulator@2 {
65				regulator-compatible = "VDCDC3";
66				reg = <2>;
67				regulator-min-microvolt = <950000>
68				regulator-max-microvolt = <1350000>;
69				regulator-always-on;
70				regulator-boot-on;
71				defdcdc_default = <1>;
72			};
73			ldo1_reg: regulator@3 {
74				regulator-compatible = "LDO1";
75				reg = <3>;
76				regulator-min-microvolt = <1710000>;
77				regulator-max-microvolt = <1890000>;
78				regulator-always-on;
79				regulator-boot-on;
80			};
81			ldo2_reg: regulator@4 {
82				regulator-compatible = "LDO2";
83				reg = <4>;
84				regulator-min-microvolt = <1140000>;
85				regulator-max-microvolt = <1320000>;
86				regulator-always-on;
87				regulator-boot-on;
88			};
89		};
90
91	};
92