xref: /linux/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml (revision ae22a94997b8a03dcb3c922857c203246711f9d4)
1# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/mfd/ti,tps6594.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: TI TPS6594 Power Management Integrated Circuit
8
9maintainers:
10  - Julien Panis <jpanis@baylibre.com>
11
12description:
13  TPS6594 is a Power Management IC which provides regulators and others
14  features like GPIOs, RTC, watchdog, ESMs (Error Signal Monitor), and
15  PFSM (Pre-configurable Finite State Machine) managing the state of the device.
16  TPS6594 is the super-set device while TPS6593 and LP8764 are derivatives.
17
18properties:
19  compatible:
20    enum:
21      - ti,lp8764-q1
22      - ti,tps6593-q1
23      - ti,tps6594-q1
24
25  reg:
26    description: I2C slave address or SPI chip select number.
27    maxItems: 1
28
29  ti,primary-pmic:
30    type: boolean
31    description: |
32      Identify the primary PMIC on SPMI bus.
33      A multi-PMIC synchronization scheme is implemented in the PMIC device
34      to synchronize the power state changes with other PMIC devices. This is
35      accomplished through a SPMI bus: the primary PMIC is the controller
36      device on the SPMI bus, and the secondary PMICs are the target devices
37      on the SPMI bus.
38
39  system-power-controller: true
40
41  gpio-controller: true
42
43  '#gpio-cells':
44    const: 2
45    description: |
46      The first cell is the pin number, the second cell is used to specify flags.
47      See ../gpio/gpio.txt for more information.
48
49  interrupts:
50    maxItems: 1
51
52  regulators:
53    type: object
54    description: List of regulators provided by this controller.
55
56    patternProperties:
57      "^buck([1-5]|12|34|123|1234)$":
58        type: object
59        $ref: /schemas/regulator/regulator.yaml#
60
61        unevaluatedProperties: false
62
63      "^ldo[1-4]$":
64        type: object
65        $ref: /schemas/regulator/regulator.yaml#
66
67        unevaluatedProperties: false
68
69    allOf:
70      - if:
71          required:
72            - buck12
73        then:
74          properties:
75            buck123: false
76            buck1234: false
77      - if:
78          required:
79            - buck123
80        then:
81          properties:
82            buck34: false
83      - if:
84          required:
85            - buck1234
86        then:
87          properties:
88            buck34: false
89
90    additionalProperties: false
91
92patternProperties:
93  "^buck([1-5]|12|34|123|1234)-supply$":
94    description: Input supply phandle for each buck.
95
96  "^ldo[1-4]-supply$":
97    description: Input supply phandle for each ldo.
98
99required:
100  - compatible
101  - reg
102  - interrupts
103
104additionalProperties: false
105
106examples:
107  - |
108    #include <dt-bindings/interrupt-controller/arm-gic.h>
109    i2c {
110        #address-cells = <1>;
111        #size-cells = <0>;
112
113        tps6593: pmic@48 {
114            compatible = "ti,tps6593-q1";
115            reg = <0x48>;
116            ti,primary-pmic;
117            system-power-controller;
118
119            gpio-controller;
120            #gpio-cells = <2>;
121
122            pinctrl-names = "default";
123            pinctrl-0 = <&pmic_irq_pins_default>;
124            interrupt-parent = <&mcu_gpio0>;
125            interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
126
127            buck123-supply = <&vcc_3v3_sys>;
128            buck4-supply = <&vcc_3v3_sys>;
129            buck5-supply = <&vcc_3v3_sys>;
130            ldo1-supply = <&vcc_3v3_sys>;
131            ldo2-supply = <&vcc_3v3_sys>;
132            ldo3-supply = <&buck5>;
133            ldo4-supply = <&vcc_3v3_sys>;
134
135            regulators {
136                buck123: buck123 {
137                    regulator-name = "vcc_core";
138                    regulator-min-microvolt = <750000>;
139                    regulator-max-microvolt = <850000>;
140                    regulator-boot-on;
141                    regulator-always-on;
142                };
143
144                buck4: buck4 {
145                    regulator-name = "vcc_1v1";
146                    regulator-min-microvolt = <1100000>;
147                    regulator-max-microvolt = <1100000>;
148                    regulator-boot-on;
149                    regulator-always-on;
150                };
151
152                buck5: buck5 {
153                    regulator-name = "vcc_1v8_sys";
154                    regulator-min-microvolt = <1800000>;
155                    regulator-max-microvolt = <1800000>;
156                    regulator-boot-on;
157                    regulator-always-on;
158                };
159
160                ldo1: ldo1 {
161                    regulator-name = "vddshv5_sdio";
162                    regulator-min-microvolt = <3300000>;
163                    regulator-max-microvolt = <3300000>;
164                    regulator-boot-on;
165                    regulator-always-on;
166                };
167
168                ldo2: ldo2 {
169                    regulator-name = "vpp_1v8";
170                    regulator-min-microvolt = <1800000>;
171                    regulator-max-microvolt = <1800000>;
172                    regulator-boot-on;
173                    regulator-always-on;
174                };
175
176                ldo3: ldo3 {
177                    regulator-name = "vcc_0v85";
178                    regulator-min-microvolt = <850000>;
179                    regulator-max-microvolt = <850000>;
180                    regulator-boot-on;
181                    regulator-always-on;
182                };
183
184                ldo4: ldo4 {
185                    regulator-name = "vdda_1v8";
186                    regulator-min-microvolt = <1800000>;
187                    regulator-max-microvolt = <1800000>;
188                    regulator-boot-on;
189                    regulator-always-on;
190                };
191            };
192        };
193    };
194