1# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/mfd/stericsson,db8500-prcmu.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: ST-Ericsson DB8500 PRCMU - Power Reset and Control Management Unit 8 9maintainers: 10 - Linus Walleij <linus.walleij@linaro.org> 11 12description: 13 The DB8500 Power Reset and Control Management Unit is an XP70 8-bit 14 microprocessor that is embedded in the always-on power domain of the 15 DB8500 SoCs to manage the low power states, powering up and down parts 16 of the silicon, and controlling reset of different IP blocks. 17 18properties: 19 $nodename: 20 pattern: '^prcmu@[0-9a-f]+$' 21 22 compatible: 23 description: The device is compatible both to the device-specific 24 compatible "stericsson,db8500-prcmu" and "syscon". The latter 25 compatible is needed for the device to be exposed as a system 26 controller so that arbitrary registers can be access by 27 different operating system components. 28 items: 29 - const: stericsson,db8500-prcmu 30 - const: syscon 31 32 reg: 33 items: 34 - description: Main PRCMU register area 35 - description: PRCMU TCPM register area 36 - description: PRCMU TCDM register area 37 38 reg-names: 39 items: 40 - const: prcmu 41 - const: prcmu-tcpm 42 - const: prcmu-tcdm 43 44 interrupts: 45 maxItems: 1 46 47 '#address-cells': 48 const: 1 49 50 '#size-cells': 51 const: 1 52 53 ranges: true 54 55 interrupt-controller: true 56 57 '#interrupt-cells': 58 const: 2 59 60 db8500-prcmu-regulators: 61 description: Node describing the DB8500 regulators. These are mainly 62 power rails inside the silicon but some of those are also routed 63 out to external pins. 64 type: object 65 66 properties: 67 compatible: 68 const: stericsson,db8500-prcmu-regulator 69 70 db8500_vape: 71 description: The voltage for the application processor, the 72 main voltage domain for the chip. 73 type: object 74 $ref: ../regulator/regulator.yaml# 75 76 db8500_varm: 77 description: The voltage for the ARM Cortex A-9 CPU. 78 type: object 79 $ref: ../regulator/regulator.yaml# 80 81 db8500_vmodem: 82 description: The voltage for the modem subsystem. 83 type: object 84 $ref: ../regulator/regulator.yaml# 85 86 db8500_vpll: 87 description: The voltage for the phase locked loop clocks. 88 type: object 89 $ref: ../regulator/regulator.yaml# 90 91 db8500_vsmps1: 92 description: Also known as VIO12, is a step-down voltage regulator 93 for 1.2V I/O. SMPS means System Management Power Source. 94 type: object 95 $ref: ../regulator/regulator.yaml# 96 97 db8500_vsmps2: 98 description: Also known as VIO18, is a step-down voltage regulator 99 for 1.8V I/O. SMPS means System Management Power Source. 100 type: object 101 $ref: ../regulator/regulator.yaml# 102 103 db8500_vsmps3: 104 description: This is a step-down voltage regulator 105 for 0.87 thru 1.875V I/O. SMPS means System Management Power Source. 106 type: object 107 $ref: ../regulator/regulator.yaml# 108 109 db8500_vrf1: 110 description: RF transciever voltage regulator. 111 type: object 112 $ref: ../regulator/regulator.yaml# 113 114 db8500_sva_mmdsp: 115 description: Smart Video Accelerator (SVA) multimedia DSP (MMDSP) 116 voltage regulator. This is the voltage for the accelerator DSP 117 for video encoding and decoding. 118 type: object 119 $ref: ../regulator/regulator.yaml# 120 121 db8500_sva_mmdsp_ret: 122 description: Smart Video Accelerator (SVA) multimedia DSP (MMDSP) 123 voltage regulator for retention mode. 124 type: object 125 $ref: ../regulator/regulator.yaml# 126 127 db8500_sva_pipe: 128 description: Smart Video Accelerator (SVA) multimedia DSP (MMDSP) 129 voltage regulator for the data pipe. 130 type: object 131 $ref: ../regulator/regulator.yaml# 132 133 db8500_sia_mmdsp: 134 description: Smart Image Accelerator (SIA) multimedia DSP (MMDSP) 135 voltage regulator. This is the voltage for the accelerator DSP 136 for image encoding and decoding. 137 type: object 138 $ref: ../regulator/regulator.yaml# 139 140 db8500_sia_mmdsp_ret: 141 description: Smart Image Accelerator (SIA) multimedia DSP (MMDSP) 142 voltage regulator for retention mode. 143 type: object 144 $ref: ../regulator/regulator.yaml# 145 146 db8500_sia_pipe: 147 description: Smart Image Accelerator (SIA) multimedia DSP (MMDSP) 148 voltage regulator for the data pipe. 149 type: object 150 $ref: ../regulator/regulator.yaml# 151 152 db8500_sga: 153 description: Smart Graphics Accelerator (SGA) voltage regulator. 154 This is in effect controlling the power to the MALI400 3D 155 accelerator block. 156 type: object 157 $ref: ../regulator/regulator.yaml# 158 159 db8500_b2r2_mcde: 160 description: Blit Blend Rotate and Rescale (B2R2), and Multi-Channel 161 Display Engine (MCDE) voltage regulator. These are two graphics 162 blocks. 163 type: object 164 $ref: ../regulator/regulator.yaml# 165 166 db8500_esram12: 167 description: Embedded Static RAM (ESRAM) 1 and 2 voltage regulator. 168 type: object 169 $ref: ../regulator/regulator.yaml# 170 171 db8500_esram12_ret: 172 description: Embedded Static RAM (ESRAM) 1 and 2 voltage regulator for 173 retention mode. 174 type: object 175 $ref: ../regulator/regulator.yaml# 176 177 db8500_esram34: 178 description: Embedded Static RAM (ESRAM) 3 and 4 voltage regulator. 179 type: object 180 $ref: ../regulator/regulator.yaml# 181 182 db8500_esram34_ret: 183 description: Embedded Static RAM (ESRAM) 3 and 4 voltage regulator for 184 retention mode. 185 type: object 186 $ref: ../regulator/regulator.yaml# 187 188 required: 189 - compatible 190 - db8500_vape 191 - db8500_varm 192 - db8500_vmodem 193 - db8500_vpll 194 - db8500_vsmps1 195 - db8500_vsmps2 196 - db8500_vsmps3 197 - db8500_vrf1 198 - db8500_sva_mmdsp 199 - db8500_sva_mmdsp_ret 200 - db8500_sva_pipe 201 - db8500_sia_mmdsp 202 - db8500_sia_mmdsp_ret 203 - db8500_sia_pipe 204 - db8500_sga 205 - db8500_b2r2_mcde 206 - db8500_esram12 207 - db8500_esram12_ret 208 - db8500_esram34 209 - db8500_esram34_ret 210 211 additionalProperties: false 212 213patternProperties: 214 "^thermal@[0-9a-f]+$": 215 description: Node describing the DB8500 thermal control functions. 216 This binds to an operating system driver that monitors the 217 temperature of the SoC. 218 type: object 219 220 properties: 221 compatible: 222 const: stericsson,db8500-thermal 223 224 reg: 225 maxItems: 1 226 227 interrupts: 228 items: 229 - description: Hotmon low interrupt (falling temperature) 230 - description: Hotmon high interrupt (rising temperature) 231 232 interrupt-names: 233 items: 234 - const: IRQ_HOTMON_LOW 235 - const: IRQ_HOTMON_HIGH 236 237 '#thermal-sensor-cells': 238 const: 0 239 240 additionalProperties: false 241 242 "^prcmu-timer-4@[0-9a-f]+$": 243 description: Node describing the externally visible timer 4 in the 244 PRCMU block. This timer is interesting to the operating system 245 since even thought it has a very low resolution (32768 Hz) it is 246 always on, and thus provides a consistent monotonic timeline for 247 the system. 248 type: object 249 250 properties: 251 compatible: 252 const: stericsson,db8500-prcmu-timer-4 253 254 reg: 255 maxItems: 1 256 257 additionalProperties: false 258 259 "^ab850[05]$": 260 description: Node describing the Analog Baseband 8500 mixed-signals 261 ASIC AB8500 and subcomponents. The AB8500 is accessed through the 262 PRCMU and hence it appears here. This component has a separate 263 set of devicetree bindings. The AB8505 is a newer version of the 264 same ASIC. 265 type: object 266 $ref: stericsson,ab8500.yaml# 267 268required: 269 - compatible 270 - reg 271 - '#address-cells' 272 - '#size-cells' 273 - ranges 274 - interrupts 275 - interrupt-controller 276 - '#interrupt-cells' 277 - db8500-prcmu-regulators 278 279additionalProperties: false 280