1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/mfd/st,stpmic1.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: STMicroelectonics STPMIC1 Power Management IC bindings 8 9description: STMicroelectronics STPMIC1 Power Management IC 10 11maintainers: 12 - pascal Paillet <p.paillet@foss.st.com> 13 14properties: 15 compatible: 16 const: st,stpmic1 17 18 reg: 19 const: 0x33 20 21 interrupts: 22 maxItems: 1 23 24 "#interrupt-cells": 25 const: 2 26 27 interrupt-controller: true 28 29 onkey: 30 type: object 31 32 $ref: ../input/input.yaml 33 34 properties: 35 compatible: 36 const: st,stpmic1-onkey 37 38 interrupts: 39 items: 40 - description: onkey-falling, happens when onkey is pressed. IT_PONKEY_F of pmic 41 - description: onkey-rising, happens when onkey is released. IT_PONKEY_R of pmic 42 43 interrupt-names: 44 items: 45 - const: onkey-falling 46 - const: onkey-rising 47 48 st,onkey-clear-cc-flag: 49 description: onkey is able power on after an over-current shutdown event. 50 $ref: /schemas/types.yaml#/definitions/flag 51 52 st,onkey-pu-inactive: 53 description: onkey pull up is not active 54 $ref: /schemas/types.yaml#/definitions/flag 55 56 power-off-time-sec: 57 minimum: 1 58 maximum: 16 59 60 required: 61 - compatible 62 - interrupts 63 - interrupt-names 64 65 additionalProperties: false 66 67 watchdog: 68 type: object 69 70 $ref: ../watchdog/watchdog.yaml 71 72 properties: 73 compatible: 74 const: st,stpmic1-wdt 75 76 timeout-sec: true 77 78 required: 79 - compatible 80 81 additionalProperties: false 82 83 regulators: 84 type: object 85 86 description: | 87 Available Regulators in STPMIC1 device are: 88 - buck1 for Buck BUCK1 89 - buck2 for Buck BUCK2 90 - buck3 for Buck BUCK3 91 - buck4 for Buck BUCK4 92 - ldo1 for LDO LDO1 93 - ldo2 for LDO LDO2 94 - ldo3 for LDO LDO3 95 - ldo4 for LDO LDO4 96 - ldo5 for LDO LDO5 97 - ldo6 for LDO LDO6 98 - vref_ddr for LDO Vref DDR 99 - boost for Buck BOOST 100 - pwr_sw1 for VBUS_OTG switch 101 - pwr_sw2 for SW_OUT switch 102 Switches are fixed voltage regulators with only enable/disable capability. 103 104 properties: 105 compatible: 106 const: st,stpmic1-regulators 107 108 ldo3: 109 type: object 110 111 properties: 112 interrupts: 113 maxItems: 1 114 115 st,mask-reset: 116 description: mask reset for this regulator, the regulator configuration 117 is maintained during pmic reset. 118 $ref: /schemas/types.yaml#/definitions/flag 119 120 regulator-name: true 121 regulator-boot-on: true 122 regulator-always-on: true 123 regulator-min-microvolt: true 124 regulator-max-microvolt: true 125 regulator-allow-bypass: true 126 regulator-over-current-protection: true 127 128 additionalProperties: false 129 130 ldo4: 131 type: object 132 133 properties: 134 interrupts: 135 maxItems: 1 136 137 st,mask-reset: 138 description: mask reset for this regulator, the regulator configuration 139 is maintained during pmic reset. 140 $ref: /schemas/types.yaml#/definitions/flag 141 142 regulator-name: true 143 regulator-boot-on: true 144 regulator-always-on: true 145 regulator-over-current-protection: true 146 147 additionalProperties: false 148 149 vref_ddr: 150 type: object 151 152 properties: 153 interrupts: 154 maxItems: 1 155 156 st,mask-reset: 157 description: mask reset for this regulator, the regulator configuration 158 is maintained during pmic reset. 159 $ref: /schemas/types.yaml#/definitions/flag 160 161 regulator-name: true 162 regulator-boot-on: true 163 regulator-always-on: true 164 165 additionalProperties: false 166 167 boost: 168 type: object 169 170 properties: 171 interrupts: 172 maxItems: 1 173 174 st,mask-reset: 175 description: mask reset for this regulator, the regulator configuration 176 is maintained during pmic reset. 177 $ref: /schemas/types.yaml#/definitions/flag 178 179 regulator-name: true 180 regulator-boot-on: true 181 regulator-always-on: true 182 regulator-over-current-protection: true 183 184 additionalProperties: false 185 186 patternProperties: 187 "^(buck[1-4]|ldo[1-6]|boost|pwr_sw[1-2])-supply$": 188 description: STPMIC1 voltage regulators supplies 189 190 "^(buck[1-4]|ldo[1-6]|boost|vref_ddr|pwr_sw[1-2])$": 191 $ref: ../regulator/regulator.yaml 192 193 "^ldo[1-2,5-6]$": 194 type: object 195 196 properties: 197 interrupts: 198 maxItems: 1 199 200 st,mask-reset: 201 description: mask reset for this regulator, the regulator configuration 202 is maintained during pmic reset. 203 $ref: /schemas/types.yaml#/definitions/flag 204 205 regulator-name: true 206 regulator-boot-on: true 207 regulator-always-on: true 208 regulator-min-microvolt: true 209 regulator-max-microvolt: true 210 regulator-over-current-protection: true 211 regulator-enable-ramp-delay: true 212 213 additionalProperties: false 214 215 "^buck[1-4]$": 216 type: object 217 218 properties: 219 interrupts: 220 maxItems: 1 221 222 st,mask-reset: 223 description: mask reset for this regulator, the regulator configuration 224 is maintained during pmic reset. 225 $ref: /schemas/types.yaml#/definitions/flag 226 227 regulator-name: true 228 regulator-boot-on: true 229 regulator-always-on: true 230 regulator-min-microvolt: true 231 regulator-max-microvolt: true 232 regulator-initial-mode: true 233 regulator-pull-down: true 234 regulator-over-current-protection: true 235 regulator-enable-ramp-delay: true 236 237 additionalProperties: false 238 239 "^pwr_sw[1-2]$": 240 type: object 241 242 properties: 243 interrupts: 244 maxItems: 1 245 246 regulator-name: true 247 regulator-boot-on: true 248 regulator-always-on: true 249 regulator-over-current-protection: true 250 regulator-active-discharge: true 251 252 additionalProperties: false 253 254 required: 255 - compatible 256 257 additionalProperties: false 258 259additionalProperties: false 260 261required: 262 - compatible 263 - reg 264 - interrupts 265 - "#interrupt-cells" 266 - interrupt-controller 267 268examples: 269 - | 270 #include <dt-bindings/mfd/st,stpmic1.h> 271 #include <dt-bindings/interrupt-controller/arm-gic.h> 272 i2c { 273 #address-cells = <1>; 274 #size-cells = <0>; 275 pmic@33 { 276 compatible = "st,stpmic1"; 277 reg = <0x33>; 278 interrupt-parent = <&gpioa>; 279 interrupts = <0 2>; 280 281 interrupt-controller; 282 #interrupt-cells = <2>; 283 284 onkey { 285 compatible = "st,stpmic1-onkey"; 286 interrupts = <IT_PONKEY_F 0>,<IT_PONKEY_R 1>; 287 interrupt-names = "onkey-falling", "onkey-rising"; 288 power-off-time-sec = <10>; 289 }; 290 291 watchdog { 292 compatible = "st,stpmic1-wdt"; 293 }; 294 295 regulators { 296 compatible = "st,stpmic1-regulators"; 297 298 ldo6-supply = <&v3v3>; 299 300 buck1 { 301 regulator-name = "vdd_core"; 302 interrupts = <IT_CURLIM_BUCK1 0>; 303 st,mask-reset; 304 regulator-boot-on; 305 regulator-min-microvolt = <700000>; 306 regulator-max-microvolt = <1200000>; 307 }; 308 309 buck3 { 310 regulator-name = "vdd"; 311 regulator-min-microvolt = <3300000>; 312 regulator-max-microvolt = <3300000>; 313 regulator-boot-on; 314 regulator-pull-down; 315 }; 316 317 buck4 { 318 regulator-name = "v3v3"; 319 interrupts = <IT_CURLIM_BUCK4 0>; 320 regulator-min-microvolt = <3300000>; 321 regulator-max-microvolt = <3300000>; 322 }; 323 324 ldo6 { 325 regulator-name = "v1v8"; 326 regulator-min-microvolt = <1800000>; 327 regulator-max-microvolt = <1800000>; 328 regulator-over-current-protection; 329 }; 330 }; 331 }; 332 }; 333 334... 335