xref: /linux/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml (revision 8632987380765dee716d460640aa58d58d52998e) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/mfd/st,stm32-timers.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: STMicroelectronics STM32 Timers bindings
8
9description: |
10  This hardware block provides 3 types of timer along with PWM functionality:
11    - advanced-control timers consist of a 16-bit auto-reload counter driven
12      by a programmable prescaler, break input feature, PWM outputs and
13      complementary PWM outputs channels.
14    - general-purpose timers consist of a 16-bit or 32-bit auto-reload counter
15      driven by a programmable prescaler and PWM outputs.
16    - basic timers consist of a 16-bit auto-reload counter driven by a
17      programmable prescaler.
18
19maintainers:
20  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
21
22properties:
23  compatible:
24    const: st,stm32-timers
25
26  reg:
27    maxItems: 1
28
29  clocks:
30    maxItems: 1
31
32  clock-names:
33    items:
34      - const: int
35
36  reset:
37    maxItems: 1
38
39  dmas:
40    minItems: 1
41    maxItems: 7
42
43  dma-names:
44    items:
45      enum: [ ch1, ch2, ch3, ch4, up, trig, com ]
46    minItems: 1
47    maxItems: 7
48
49  "#address-cells":
50    const: 1
51
52  "#size-cells":
53    const: 0
54
55  pwm:
56    type: object
57
58    properties:
59      compatible:
60        const: st,stm32-pwm
61
62      "#pwm-cells":
63        const: 3
64
65      st,breakinput:
66        description:
67          One or two <index level filter> to describe break input
68          configurations.
69        $ref: /schemas/types.yaml#/definitions/uint32-matrix
70        items:
71          items:
72            - description: |
73                "index" indicates on which break input (0 or 1) the
74                configuration should be applied.
75              enum: [0, 1]
76            - description: |
77                "level" gives the active level (0=low or 1=high) of the
78                input signal for this configuration
79              enum: [0, 1]
80            - description: |
81                "filter" gives the filtering value (up to 15) to be applied.
82              maximum: 15
83        minItems: 1
84        maxItems: 2
85
86    required:
87      - "#pwm-cells"
88      - compatible
89
90patternProperties:
91  "^timer@[0-9]+$":
92    type: object
93
94    properties:
95      compatible:
96        enum:
97          - st,stm32-timer-trigger
98          - st,stm32h7-timer-trigger
99
100      reg:
101        description: Identify trigger hardware block.
102        items:
103          minimum: 0
104          maximum: 16
105
106    required:
107      - compatible
108      - reg
109
110  counter:
111    type: object
112
113    properties:
114      compatible:
115        const: st,stm32-timer-counter
116
117    required:
118      - compatible
119
120required:
121  - compatible
122  - reg
123  - clocks
124  - clock-names
125
126additionalProperties: false
127
128examples:
129  - |
130    #include <dt-bindings/clock/stm32mp1-clks.h>
131    timers2: timer@40000000 {
132      #address-cells = <1>;
133      #size-cells = <0>;
134      compatible = "st,stm32-timers";
135      reg = <0x40000000 0x400>;
136      clocks = <&rcc TIM2_K>;
137      clock-names = "int";
138      dmas = <&dmamux1 18 0x400 0x1>,
139             <&dmamux1 19 0x400 0x1>,
140             <&dmamux1 20 0x400 0x1>,
141             <&dmamux1 21 0x400 0x1>,
142             <&dmamux1 22 0x400 0x1>;
143      dma-names = "ch1", "ch2", "ch3", "ch4", "up";
144      pwm {
145        compatible = "st,stm32-pwm";
146        #pwm-cells = <3>;
147        st,breakinput = <0 1 5>;
148      };
149      timer@1 {
150        compatible = "st,stm32-timer-trigger";
151        reg = <1>;
152      };
153      counter {
154        compatible = "st,stm32-timer-counter";
155      };
156    };
157
158...
159