xref: /linux/Documentation/devicetree/bindings/media/i2c/st,st-vgxy61.yaml (revision 9f2c9170934eace462499ba0bfe042cc72900173) 
1# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
2# Copyright (c) 2022 STMicroelectronics SA.
3%YAML 1.2
4---
5$id: http://devicetree.org/schemas/media/i2c/st,st-vgxy61.yaml#
6$schema: http://devicetree.org/meta-schemas/core.yaml#
7
8title: STMicroelectronics VGxy61 HDR Global Shutter Sensor Family
9
10maintainers:
11  - Benjamin Mugnier <benjamin.mugnier@foss.st.com>
12  - Sylvain Petinot <sylvain.petinot@foss.st.com>
13
14description: |-
15  STMicroelectronics VGxy61 family has a CSI-2 output port. CSI-2 output is a
16  quad lanes 800Mbps per lane.
17  Supported formats are RAW8, RAW10, RAW12, RAW14 and RAW16.
18  Following part number are supported
19  - VG5661 and VG6661 are 1.6 Mpx (1464 x 1104) monochrome and color sensors.
20  Maximum frame rate is 75 fps.
21  - VG5761 and VG6761 are 2.3 Mpx (1944 x 1204) monochrome and color sensors.
22  Maximum frame rate is 60 fps.
23
24properties:
25  compatible:
26    const: st,st-vgxy61
27
28  reg:
29    maxItems: 1
30
31  clocks:
32    maxItems: 1
33
34  VCORE-supply:
35    description:
36      Sensor digital core supply. Must be 1.2 volts.
37
38  VDDIO-supply:
39    description:
40      Sensor digital IO supply. Must be 1.8 volts.
41
42  VANA-supply:
43    description:
44      Sensor analog supply. Must be 2.8 volts.
45
46  reset-gpios:
47    description:
48      Reference to the GPIO connected to the reset pin, if any.
49      This is an active low signal to the vgxy61.
50
51  st,strobe-gpios-polarity:
52    description:
53      Invert polarity of illuminator's lights strobe GPIOs.
54      These GPIOs directly drive the illuminator LEDs.
55    type: boolean
56
57  port:
58    $ref: /schemas/graph.yaml#/$defs/port-base
59    additionalProperties: false
60
61    properties:
62      endpoint:
63        $ref: /schemas/media/video-interfaces.yaml#
64        unevaluatedProperties: false
65
66        properties:
67          data-lanes:
68            description:
69              CSI lanes to use
70            items:
71              - const: 1
72              - const: 2
73              - const: 3
74              - const: 4
75
76          remote-endpoint: true
77
78        required:
79          - data-lanes
80
81required:
82  - compatible
83  - clocks
84  - VCORE-supply
85  - VDDIO-supply
86  - VANA-supply
87  - port
88
89additionalProperties: false
90
91examples:
92  - |
93    #include <dt-bindings/gpio/gpio.h>
94    i2c {
95        #address-cells = <1>;
96        #size-cells = <0>;
97        vgxy61: csi2tx@10 {
98            compatible = "st,st-vgxy61";
99            reg = <0x10>;
100            clocks = <&clk_ext_camera>;
101            VCORE-supply = <&v1v2>;
102            VDDIO-supply = <&v1v8>;
103            VANA-supply = <&v2v8>;
104            reset-gpios = <&mfxgpio 18 GPIO_ACTIVE_LOW>;
105            port {
106                ep0: endpoint {
107                    data-lanes = <1 2 3 4>;
108                    remote-endpoint = <&mipi_csi2_out>;
109                };
110            };
111        };
112    };
113...
114