1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/media/i2c/ovti,ov7251.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: OmniVision OV7251 Image Sensor 8 9description: 10 The Omnivision OV7251 is a 1/7.5-Inch CMOS active pixel digital image sensor 11 with an active array size of 640H x 480V. It is programmable through a serial 12 I2C interface. 13 14maintainers: 15 - Todor Tomov <todor.too@gmail.com> 16 17properties: 18 compatible: 19 const: ovti,ov7251 20 21 reg: 22 maxItems: 1 23 24 clocks: 25 description: XCLK Input Clock 26 27 clock-names: 28 const: xclk 29 30 clock-frequency: 31 description: Frequency of the xclk clock in Hz. 32 33 vdda-supply: 34 description: Analog voltage supply, 2.8 volts 35 36 vddd-supply: 37 description: Digital core voltage supply, 1.2 volts 38 39 vdddo-supply: 40 description: Digital I/O voltage supply, 1.8 volts 41 42 enable-gpios: 43 maxItems: 1 44 description: 45 Reference to the GPIO connected to the XSHUTDOWN pin, if any. Polarity 46 is GPIO_ACTIVE_HIGH. 47 48 port: 49 description: Digital Output Port 50 $ref: /schemas/graph.yaml#/$defs/port-base 51 additionalProperties: false 52 53 properties: 54 endpoint: 55 $ref: /schemas/media/video-interfaces.yaml# 56 unevaluatedProperties: false 57 58 properties: 59 clock-lanes: 60 maximum: 1 61 62 data-lanes: 63 maxItems: 1 64 65 link-frequencies: true 66 67 required: 68 - data-lanes 69 - link-frequencies 70 71required: 72 - compatible 73 - reg 74 - clocks 75 - vdddo-supply 76 - vdda-supply 77 - port 78 79additionalProperties: false 80 81examples: 82 - | 83 #include <dt-bindings/gpio/gpio.h> 84 85 i2c { 86 #address-cells = <1>; 87 #size-cells = <0>; 88 89 camera@3c { 90 compatible = "ovti,ov7251"; 91 reg = <0x3c>; 92 clocks = <&clks 1>; 93 clock-frequency = <24000000>; 94 vdddo-supply = <&ov7251_vdddo_1v8>; 95 vdda-supply = <&ov7251_vdda_2v8>; 96 vddd-supply = <&ov7251_vddd_1v5>; 97 enable-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; 98 99 port { 100 ov7251_ep: endpoint { 101 remote-endpoint = <&csi0_ep>; 102 clock-lanes = <1>; 103 data-lanes = <0>; 104 link-frequencies = /bits/ 64 <240000000 319200000>; 105 }; 106 }; 107 }; 108 }; 109... 110