1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/media/i2c/galaxycore,gc2145.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Galaxy Core 1/5'' UXGA CMOS Image Sensor 8 9maintainers: 10 - Alain Volmat <alain.volmat@foss.st.com> 11 12description: 13 The Galaxy Core GC2145 is a 2 Megapixel CMOS image sensor, for mobile 14 phone camera applications and digital camera products. GC2145 incorporates a 15 1616V x 1232H active pixel array, on-chip 10-bit ADC, and image signal 16 processor allowing AE/AWB/interpolation/de-noise/color-conversion and 17 gamma correction. Bayer RGB, RGB565 and YCbCr 4:2:2 can be provided by the 18 sensor. It is programmable through an I2C interface. Image data is sent 19 either through a parallel interface or through MIPI CSI-2. 20 21allOf: 22 - $ref: /schemas/media/video-interface-devices.yaml# 23 24properties: 25 compatible: 26 const: galaxycore,gc2145 27 28 reg: 29 const: 0x3c 30 31 clocks: 32 maxItems: 1 33 34 powerdown-gpios: 35 maxItems: 1 36 37 reset-gpios: 38 maxItems: 1 39 40 iovdd-supply: 41 description: Power Supply for I/O circuits (1.7 - 3V). 42 43 avdd-supply: 44 description: Power for analog circuit/sensor array (2.7 - 3V). 45 46 dvdd-supply: 47 description: Power for digital core (1.7 - 1.9V). 48 49 orientation: true 50 51 rotation: true 52 53 port: 54 $ref: /schemas/graph.yaml#/$defs/port-base 55 56 properties: 57 endpoint: 58 $ref: /schemas/media/video-interfaces.yaml# 59 unevaluatedProperties: false 60 61 properties: 62 link-frequencies: true 63 64 required: 65 - link-frequencies 66 67 required: 68 - endpoint 69 70 additionalProperties: false 71 72required: 73 - compatible 74 - reg 75 - clocks 76 - powerdown-gpios 77 - reset-gpios 78 - iovdd-supply 79 - avdd-supply 80 - dvdd-supply 81 - port 82 83additionalProperties: false 84 85examples: 86 - | 87 #include <dt-bindings/gpio/gpio.h> 88 89 i2c { 90 #address-cells = <1>; 91 #size-cells = <0>; 92 93 camera@3c { 94 compatible = "galaxycore,gc2145"; 95 reg = <0x3c>; 96 clocks = <&clk_ext_camera>; 97 iovdd-supply = <&scmi_v3v3_sw>; 98 avdd-supply = <&scmi_v3v3_sw>; 99 dvdd-supply = <&scmi_v3v3_sw>; 100 powerdown-gpios = <&mcp23017 3 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>; 101 reset-gpios = <&mcp23017 4 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>; 102 103 port { 104 endpoint { 105 remote-endpoint = <&mipid02_0>; 106 data-lanes = <1 2>; 107 link-frequencies = /bits/ 64 <120000000 192000000 240000000>; 108 }; 109 }; 110 }; 111 }; 112 113... 114