xref: /linux/Documentation/devicetree/bindings/media/i2c/galaxycore,gc08a3.yaml (revision f057b57270c2a17d3f45c177e9434fa5745caa48) 
1# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
2# Copyright (c) 2023 MediaTek Inc.
3%YAML 1.2
4---
5$id: http://devicetree.org/schemas/media/i2c/galaxycore,gc08a3.yaml#
6$schema: http://devicetree.org/meta-schemas/core.yaml#
7
8title: GalaxyCore gc08a3 1/4" 8M Pixel MIPI CSI-2 sensor
9
10maintainers:
11  - Zhi Mao <zhi.mao@mediatek.com>
12
13description:
14  The gc08a3 is a raw image sensor with an MIPI CSI-2 image data
15  interface and CCI (I2C compatible) control bus. The output format
16  is raw Bayer.
17
18properties:
19  compatible:
20    const: galaxycore,gc08a3
21
22  reg:
23    maxItems: 1
24
25  clocks:
26    maxItems: 1
27
28  dovdd-supply: true
29
30  avdd-supply: true
31
32  dvdd-supply: true
33
34  reset-gpios:
35    description: Reference to the GPIO connected to the RESETB pin.
36    maxItems: 1
37
38  port:
39    $ref: /schemas/graph.yaml#/$defs/port-base
40    additionalProperties: false
41    description:
42      Output port node, single endpoint describing the CSI-2 transmitter.
43
44    properties:
45      endpoint:
46        $ref: /schemas/media/video-interfaces.yaml#
47        unevaluatedProperties: false
48
49        properties:
50          data-lanes:
51            oneOf:
52              - items:
53                  - const: 1
54                  - const: 2
55                  - const: 3
56                  - const: 4
57              - items:
58                  - const: 1
59                  - const: 2
60
61          link-frequencies: true
62
63        required:
64          - data-lanes
65          - link-frequencies
66
67    required:
68      - endpoint
69
70required:
71  - compatible
72  - reg
73  - clocks
74  - dovdd-supply
75  - avdd-supply
76  - dvdd-supply
77  - reset-gpios
78  - port
79
80additionalProperties: false
81
82examples:
83  - |
84    #include <dt-bindings/gpio/gpio.h>
85
86    i2c {
87        #address-cells = <1>;
88        #size-cells = <0>;
89
90        sensor@31 {
91            compatible = "galaxycore,gc08a3";
92            reg = <0x31>;
93
94            clocks = <&gc08a3_clk>;
95
96            reset-gpios = <&pio 19 GPIO_ACTIVE_LOW>;
97
98            avdd-supply = <&gc08a3_avdd>;
99            dovdd-supply = <&gc08a3_dovdd>;
100            dvdd-supply = <&gc08a3_dvdd>;
101
102            port {
103                sensor_out: endpoint {
104                    data-lanes = <1 2 3 4>;
105                    link-frequencies = /bits/ 64 <336000000 207000000>;
106                    remote-endpoint = <&seninf_csi_port_0_in>;
107                };
108            };
109        };
110    };
111
112...
113