1* Analog Devices ADP1653 flash LED driver 2 3Required Properties: 4 5 - compatible: Must contain "adi,adp1653" 6 7 - reg: I2C slave address 8 9 - enable-gpios: Specifier of the GPIO connected to EN pin 10 11There are two LED outputs available - flash and indicator. One LED is 12represented by one child node, nodes need to be named "flash" and "indicator". 13 14Required properties of the LED child node: 15- max-microamp : see Documentation/devicetree/bindings/leds/common.txt 16 17Required properties of the flash LED child node: 18 19- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt 20- flash-timeout-us : see Documentation/devicetree/bindings/leds/common.txt 21 22Example: 23 24 adp1653: led-controller@30 { 25 compatible = "adi,adp1653"; 26 reg = <0x30>; 27 enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */ 28 29 flash { 30 flash-timeout-us = <500000>; 31 flash-max-microamp = <320000>; 32 max-microamp = <50000>; 33 }; 34 indicator { 35 max-microamp = <17500>; 36 }; 37 }; 38