xref: /linux/Documentation/devicetree/bindings/leds/maxim,max77693.yaml (revision 69bfec7548f4c1595bac0e3ddfc0458a5af31f4c) 
1# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/leds/maxim,max77693.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Maxim MAX77693 MicroUSB and Companion Power Management IC LEDs
8
9maintainers:
10  - Krzysztof Kozlowski <krzk@kernel.org>
11
12description: |
13  This is a part of device tree bindings for Maxim MAX77693 MicroUSB Integrated
14  Circuit (MUIC).
15
16  There are two LED outputs available - FLED1 and FLED2. Each of them can
17  control a separate LED or they can be connected together to double the
18  maximum current for a single connected LED. One LED is represented by one
19  child node.
20
21  See also Documentation/devicetree/bindings/mfd/maxim,max77693.yaml for
22  additional information and example.
23
24properties:
25  compatible:
26    const: maxim,max77693-led
27
28  maxim,boost-mode:
29    description:
30      In boost mode the device can produce up to 1.2A of total current on both
31      outputs. The maximum current on each output is reduced to 625mA then. If
32      not enabled explicitly, boost setting defaults to LEDS_BOOST_FIXED in
33      case both current sources are used.
34      See LEDS_BOOST_* in include/dt-bindings/leds/common.h.
35    $ref: /schemas/types.yaml#/definitions/uint32
36    enum: [0, 1, 2]
37
38  maxim,boost-mvout:
39    description: |
40      Output voltage of the boost module in millivolts.
41      Valid values: 3300 - 5500, step by 25 (rounded down)
42    $ref: /schemas/types.yaml#/definitions/uint32
43    minimum: 3300
44    maximum: 5500
45    default: 3300
46
47  maxim,mvsys-min:
48    description: |
49      Low input voltage level in millivolts. Flash is not fired if chip
50      estimates that system voltage could drop below this level due to flash
51      power consumption.
52      Valid values: 2400 - 3400, step by 33 (rounded down)
53    $ref: /schemas/types.yaml#/definitions/uint32
54    minimum: 2400
55    maximum: 3400
56    default: 2400
57
58patternProperties:
59  "^([a-z]+-)?led[01]?$":
60    type: object
61    $ref: common.yaml#
62    unevaluatedProperties: false
63
64    properties:
65      led-sources:
66        allOf:
67          - minItems: 1
68            maxItems: 2
69            items:
70              minimum: 0
71              maximum: 1
72
73      led-max-microamp:
74        description: |
75          Valid values for a LED connected to one FLED output:
76            15625 - 250000, step by 15625 (rounded down)
77          Valid values for a LED connected to both FLED outputs:
78            15625 - 500000, step by 15625 (rounded down)
79
80      flash-max-microamp:
81        description: |
82          Valid values for a single LED connected to one FLED output
83          (boost mode must be turned off):
84            15625 - 1000000, step by 15625 (rounded down)
85          Valid values for a single LED connected to both FLED outputs:
86            15625 - 1250000, step by 15625 (rounded down)
87          Valid values for two LEDs case:
88            15625 - 625000, step by 15625 (rounded down)
89
90      flash-max-timeout-us:
91        description: |
92          Valid values: 62500 - 1000000, step by 62500 (rounded down)
93        minimum: 62500
94        maximum: 1000000
95
96    required:
97      - flash-max-microamp
98      - flash-max-timeout-us
99      - led-max-microamp
100      - led-sources
101
102required:
103  - compatible
104
105additionalProperties: false
106