1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/leds/leds-qcom-lpg.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Qualcomm Light Pulse Generator 8 9maintainers: 10 - Bjorn Andersson <bjorn.andersson@linaro.org> 11 12description: > 13 The Qualcomm Light Pulse Generator consists of three different hardware blocks; 14 a ramp generator with lookup table, the light pulse generator and a three 15 channel current sink. These blocks are found in a wide range of Qualcomm PMICs. 16 17properties: 18 compatible: 19 enum: 20 - qcom,pm8150b-lpg 21 - qcom,pm8150l-lpg 22 - qcom,pm8350c-pwm 23 - qcom,pm8916-pwm 24 - qcom,pm8941-lpg 25 - qcom,pm8994-lpg 26 - qcom,pmc8180c-lpg 27 - qcom,pmi8994-lpg 28 - qcom,pmi8998-lpg 29 30 "#pwm-cells": 31 const: 2 32 33 "#address-cells": 34 const: 1 35 36 "#size-cells": 37 const: 0 38 39 qcom,power-source: 40 $ref: /schemas/types.yaml#/definitions/uint32 41 description: 42 power-source used to drive the output, as defined in the datasheet. 43 Should be specified if the TRILED block is present 44 enum: [0, 1, 3] 45 46 qcom,dtest: 47 $ref: /schemas/types.yaml#/definitions/uint32-matrix 48 description: > 49 A list of integer pairs, where each pair represent the dtest line the 50 particular channel should be connected to and the flags denoting how the 51 value should be outputed, as defined in the datasheet. The number of 52 pairs should be the same as the number of channels. 53 items: 54 items: 55 - description: dtest line to attach 56 - description: flags for the attachment 57 58 multi-led: 59 type: object 60 $ref: leds-class-multicolor.yaml# 61 properties: 62 "#address-cells": 63 const: 1 64 65 "#size-cells": 66 const: 0 67 68 patternProperties: 69 "^led@[0-9a-f]$": 70 type: object 71 $ref: common.yaml# 72 73patternProperties: 74 "^led@[0-9a-f]$": 75 type: object 76 $ref: common.yaml# 77 78 properties: 79 reg: true 80 81 required: 82 - reg 83 84required: 85 - compatible 86 87additionalProperties: false 88 89examples: 90 - | 91 #include <dt-bindings/leds/common.h> 92 93 led-controller { 94 compatible = "qcom,pmi8994-lpg"; 95 96 #address-cells = <1>; 97 #size-cells = <0>; 98 99 qcom,power-source = <1>; 100 101 qcom,dtest = <0 0>, 102 <0 0>, 103 <0 0>, 104 <4 1>; 105 106 led@1 { 107 reg = <1>; 108 color = <LED_COLOR_ID_GREEN>; 109 function = LED_FUNCTION_INDICATOR; 110 function-enumerator = <1>; 111 }; 112 113 led@2 { 114 reg = <2>; 115 color = <LED_COLOR_ID_GREEN>; 116 function = LED_FUNCTION_INDICATOR; 117 function-enumerator = <0>; 118 default-state = "on"; 119 }; 120 121 led@3 { 122 reg = <3>; 123 color = <LED_COLOR_ID_GREEN>; 124 function = LED_FUNCTION_INDICATOR; 125 function-enumerator = <2>; 126 }; 127 128 led@4 { 129 reg = <4>; 130 color = <LED_COLOR_ID_GREEN>; 131 function = LED_FUNCTION_INDICATOR; 132 function-enumerator = <3>; 133 }; 134 }; 135 - | 136 #include <dt-bindings/leds/common.h> 137 138 led-controller { 139 compatible = "qcom,pmi8994-lpg"; 140 141 #address-cells = <1>; 142 #size-cells = <0>; 143 144 qcom,power-source = <1>; 145 146 multi-led { 147 color = <LED_COLOR_ID_RGB>; 148 function = LED_FUNCTION_STATUS; 149 150 #address-cells = <1>; 151 #size-cells = <0>; 152 153 led@1 { 154 reg = <1>; 155 color = <LED_COLOR_ID_RED>; 156 }; 157 158 led@2 { 159 reg = <2>; 160 color = <LED_COLOR_ID_GREEN>; 161 }; 162 163 led@3 { 164 reg = <3>; 165 color = <LED_COLOR_ID_BLUE>; 166 }; 167 }; 168 }; 169 - | 170 pwm-controller { 171 compatible = "qcom,pm8916-pwm"; 172 #pwm-cells = <2>; 173 }; 174... 175