1Binding for dual-GPIO LED found on Network Space v2 (and parents). 2 3Required properties: 4- compatible: "lacie,ns2-leds". 5 6Each LED is represented as a sub-node of the ns2-leds device. 7 8Required sub-node properties: 9- cmd-gpio: Command LED GPIO. See OF device-tree GPIO specification. 10- slow-gpio: Slow LED GPIO. See OF device-tree GPIO specification. 11- modes-map: A mapping between LED modes (off, on or SATA activity blinking) and 12 the corresponding cmd-gpio/slow-gpio values. All the GPIO values combinations 13 should be given in order to avoid having an unknown mode at driver probe time. 14 15Optional sub-node properties: 16- label: Name for this LED. If omitted, the label is taken from the node name. 17- linux,default-trigger: Trigger assigned to the LED. 18 19Example: 20 21#include <dt-bindings/leds/leds-ns2.h> 22 23ns2-leds { 24 compatible = "lacie,ns2-leds"; 25 26 blue-sata { 27 label = "ns2:blue:sata"; 28 slow-gpio = <&gpio0 29 0>; 29 cmd-gpio = <&gpio0 30 0>; 30 modes-map = <NS_V2_LED_OFF 0 1 31 NS_V2_LED_ON 1 0 32 NS_V2_LED_ON 0 0 33 NS_V2_LED_SATA 1 1>; 34 }; 35}; 36