xref: /linux/Documentation/devicetree/bindings/leds/kinetic,ktd2692.yaml (revision 0526b56cbc3c489642bd6a5fe4b718dea7ef0ee8) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/leds/kinetic,ktd2692.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: KTD2692 Flash LED Driver from Kinetic Technologies
8
9maintainers:
10  - Markuss Broks <markuss.broks@gmail.com>
11
12description: |
13  KTD2692 is the ideal power solution for high-power flash LEDs.
14  It uses ExpressWire single-wire programming for maximum flexibility.
15
16  The ExpressWire interface through CTRL pin can control LED on/off and
17  enable/disable the IC, Movie(max 1/3 of Flash current) / Flash mode current,
18  Flash timeout, LVP(low voltage protection).
19
20  Also, When the AUX pin is pulled high while CTRL pin is high,
21  LED current will be ramped up to the flash-mode current level.
22
23properties:
24  compatible:
25    const: kinetic,ktd2692
26
27  ctrl-gpios:
28    maxItems: 1
29    description: Specifier of the GPIO connected to CTRL pin.
30
31  aux-gpios:
32    maxItems: 1
33    description: Specifier of the GPIO connected to CTRL pin.
34
35  vin-supply:
36    description: LED supply (2.7V to 5.5V).
37
38  led:
39    type: object
40    $ref: common.yaml#
41    description: Properties for the LED.
42    properties:
43      function: true
44      color: true
45      flash-max-timeout-us:
46        description: Flash LED maximum timeout.
47
48      led-max-microamp:
49        maximum: 300000
50        description: Minimum Threshold for Timer protection
51          is defined internally (Maximum 300mA).
52
53      flash-max-microamp:
54        maximum: 300000
55        description: Flash LED maximum current
56          Formula - I(uA) = 15000000 / Rset.
57
58    additionalProperties: false
59
60required:
61  - compatible
62  - ctrl-gpios
63  - led
64
65additionalProperties: false
66
67examples:
68  - |
69    #include <dt-bindings/gpio/gpio.h>
70    #include <dt-bindings/leds/common.h>
71
72    ktd2692 {
73      compatible = "kinetic,ktd2692";
74      ctrl-gpios = <&gpc0 1 0>;
75      aux-gpios = <&gpc0 2 0>;
76      vin-supply = <&vbat>;
77
78      led {
79        function = LED_FUNCTION_FLASH;
80        color = <LED_COLOR_ID_WHITE>;
81        flash-max-timeout-us = <250000>;
82        flash-max-microamp = <150000>;
83        led-max-microamp = <25000>;
84      };
85    };
86
87...
88