xref: /linux/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.yaml (revision bf373e4c786bfe989e637195252698f45b157a68)

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/interrupt-controller/snps,dw-apb-ictl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Synopsys DesignWare APB interrupt controller

maintainers:
  - Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
  - Zhen Lei <thunder.leizhen@huawei.com>

description:
  Synopsys DesignWare provides interrupt controller IP for APB known as
  dw_apb_ictl. The IP is used as secondary interrupt controller in some SoCs
  with APB bus, e.g. Marvell Armada 1500. It can also be used as primary
  interrupt controller in some SoCs, e.g. Hisilicon SD5203.

properties:
  compatible:
    const: snps,dw-apb-ictl

  reg:
    maxItems: 1

  interrupt-controller: true

  '#interrupt-cells':
    const: 1

  interrupts:
    maxItems: 1
    description: >
      Interrupt input connected to the primary interrupt controller when used
      as a secondary controller. The interrupt specifier maps to bits in the
      low and high interrupt registers (0⇒bit 0 low, 1⇒bit 1 low, 32⇒bit 0 high,
      33⇒bit 1 high, fast interrupts start at 64).

required:
  - compatible
  - reg
  - interrupt-controller
  - '#interrupt-cells'

additionalProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/arm-gic.h>

    interrupt-controller@3000 {
        compatible = "snps,dw-apb-ictl";
        reg = <0x3000 0xc00>;
        interrupt-controller;
        #interrupt-cells = <1>;
        interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
    };
  - |
    interrupt-controller@10130000 {
        compatible = "snps,dw-apb-ictl";
        reg = <0x10130000 0x1000>;
        interrupt-controller;
        #interrupt-cells = <1>;
    };