1* MELFAS MIP4 Touchscreen 2 3Required properties: 4- compatible: must be "melfas,mip4_ts" 5- reg: I2C slave address of the chip (0x48 or 0x34) 6- interrupt-parent: interrupt controller to which the chip is connected 7- interrupts: interrupt to which the chip is connected 8 9Optional properties: 10- ce-gpios: GPIO connected to the CE (chip enable) pin of the chip 11 12Example: 13 i2c@00000000 { 14 touchscreen: melfas_mip4@48 { 15 compatible = "melfas,mip4_ts"; 16 reg = <0x48>; 17 interrupt-parent = <&gpio>; 18 interrupts = <0 IRQ_TYPE_EDGE_FALLING>; 19 ce-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; 20 }; 21 }; 22