1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/input/elan,ekth6915.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Elan eKTH6915 touchscreen controller 8 9maintainers: 10 - Douglas Anderson <dianders@chromium.org> 11 12description: 13 Supports the Elan eKTH6915 touchscreen controller. 14 This touchscreen controller uses the i2c-hid protocol with a reset GPIO. 15 16allOf: 17 - $ref: /schemas/input/touchscreen/touchscreen.yaml# 18 19properties: 20 compatible: 21 oneOf: 22 - items: 23 - enum: 24 - elan,ekth5015m 25 - const: elan,ekth6915 26 - enum: 27 - elan,ekth6915 28 - elan,ekth6a12nay 29 30 reg: 31 const: 0x10 32 33 interrupts: 34 maxItems: 1 35 36 panel: true 37 38 reset-gpios: 39 description: Reset GPIO; not all touchscreens using eKTH6915 hook this up. 40 41 no-reset-on-power-off: 42 type: boolean 43 description: 44 Reset line is wired so that it can (and should) be left deasserted when 45 the power supply is off. 46 47 vcc33-supply: 48 description: The 3.3V supply to the touchscreen. 49 50 vccio-supply: 51 description: 52 The IO supply to the touchscreen. Need not be specified if this is the 53 same as the 3.3V supply. 54 55required: 56 - compatible 57 - reg 58 - interrupts 59 - vcc33-supply 60 61additionalProperties: false 62 63examples: 64 - | 65 #include <dt-bindings/gpio/gpio.h> 66 #include <dt-bindings/interrupt-controller/irq.h> 67 68 i2c { 69 #address-cells = <1>; 70 #size-cells = <0>; 71 72 touchscreen@10 { 73 compatible = "elan,ekth5015m", "elan,ekth6915"; 74 reg = <0x10>; 75 76 interrupt-parent = <&tlmm>; 77 interrupts = <9 IRQ_TYPE_LEVEL_LOW>; 78 79 reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; 80 vcc33-supply = <&pp3300_ts>; 81 }; 82 }; 83