1# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 2# Copyright 2020 Analog Devices Inc. 3%YAML 1.2 4--- 5$id: http://devicetree.org/schemas/iio/dac/adi,ad3552r.yaml# 6$schema: http://devicetree.org/meta-schemas/core.yaml# 7 8title: Analog Devices AD2552R DAC device driver 9 10maintainers: 11 - Nuno Sá <nuno.sa@analog.com> 12 13description: | 14 Bindings for the Analog Devices AD3552R DAC device and similar. 15 Datasheet can be found here: 16 https://www.analog.com/media/en/technical-documentation/data-sheets/ad3541r.pdf 17 https://www.analog.com/media/en/technical-documentation/data-sheets/ad3542r.pdf 18 https://www.analog.com/media/en/technical-documentation/data-sheets/ad3551r.pdf 19 https://www.analog.com/media/en/technical-documentation/data-sheets/ad3552r.pdf 20 21properties: 22 compatible: 23 enum: 24 - adi,ad3541r 25 - adi,ad3542r 26 - adi,ad3551r 27 - adi,ad3552r 28 29 reg: 30 maxItems: 1 31 32 spi-max-frequency: 33 maximum: 30000000 34 35 reset-gpios: 36 maxItems: 1 37 38 ldac-gpios: 39 description: | 40 LDAC pin to be used as a hardware trigger to update the DAC channels. 41 maxItems: 1 42 43 vref-supply: 44 description: 45 The regulator to use as an external reference. If it does not exists the 46 internal reference will be used. External reference must be 2.5V 47 48 adi,vref-out-en: 49 description: Vref I/O driven by internal vref to 2.5V. If not set, Vref pin 50 will be floating. 51 type: boolean 52 53 adi,sdo-drive-strength: 54 description: | 55 Configure SDIO0 and SDIO1 strength levels: 56 - 0: low SDO drive strength. 57 - 1: medium low SDO drive strength. 58 - 2: medium high SDO drive strength. 59 - 3: high SDO drive strength 60 $ref: /schemas/types.yaml#/definitions/uint32 61 enum: [0, 1, 2, 3] 62 63 '#address-cells': 64 const: 1 65 66 '#size-cells': 67 const: 0 68 69patternProperties: 70 "^channel@([0-1])$": 71 type: object 72 description: Configurations of the DAC Channels 73 74 additionalProperties: false 75 76 properties: 77 reg: 78 description: Channel number 79 enum: [0, 1] 80 81 adi,output-range-microvolt: true 82 83 custom-output-range-config: 84 type: object 85 additionalProperties: false 86 description: Configuration of custom range when 87 adi,output-range-microvolt is not present. 88 The formulas for calculation the output voltages are 89 Vout_fs = 2.5 + [(GainN + Offset/1024) * 2.5 * Rfbx * 1.03] 90 Vout_zs = 2.5 - [(GainP + Offset/1024) * 2.5 * Rfbx * 1.03] 91 92 properties: 93 adi,gain-offset: 94 description: Gain offset used in the above formula 95 $ref: /schemas/types.yaml#/definitions/int32 96 maximum: 511 97 minimum: -511 98 99 adi,gain-scaling-p: 100 description: GainP = 1 / ( 2 ^ adi,gain-scaling-p) 101 $ref: /schemas/types.yaml#/definitions/uint32 102 enum: [0, 1, 2, 3] 103 104 adi,gain-scaling-n: 105 description: GainN = 1 / ( 2 ^ adi,gain-scaling-n) 106 $ref: /schemas/types.yaml#/definitions/uint32 107 enum: [0, 1, 2, 3] 108 109 adi,rfb-ohms: 110 description: Feedback Resistor 111 112 required: 113 - adi,gain-offset 114 - adi,gain-scaling-p 115 - adi,gain-scaling-n 116 - adi,rfb-ohms 117 118 required: 119 - reg 120 121 oneOf: 122 # If adi,output-range-microvolt is missing, 123 # custom-output-range-config must be used 124 - required: 125 - adi,output-range-microvolt 126 127 - required: 128 - custom-output-range-config 129 130allOf: 131 - if: 132 properties: 133 compatible: 134 contains: 135 enum: 136 - adi,ad3541r 137 - adi,ad3542r 138 then: 139 patternProperties: 140 "^channel@([0-1])$": 141 type: object 142 properties: 143 adi,output-range-microvolt: 144 description: | 145 Voltage output range of the channel as <minimum, maximum> 146 Required connections: 147 Rfb1x for: 0 to 2.5 V; 0 to 3V; 0 to 5 V; 148 Rfb2x for: 0 to 10 V; 2.5 to 7.5V; -5 to 5 V; 149 oneOf: 150 - items: 151 - const: 0 152 - enum: [2500000, 3000000, 5000000, 10000000] 153 - items: 154 - const: -2500000 155 - const: 7500000 156 - items: 157 - const: -5000000 158 - const: 5000000 159 160 required: 161 - adi,output-range-microvolt 162 163 - if: 164 properties: 165 compatible: 166 contains: 167 enum: 168 - adi,ad3551r 169 - adi,ad3552r 170 then: 171 patternProperties: 172 "^channel@([0-1])$": 173 type: object 174 properties: 175 adi,output-range-microvolt: 176 description: | 177 Voltage output range of the channel as <minimum, maximum> 178 Required connections: 179 Rfb1x for: 0 to 2.5 V; 0 to 5 V; 180 Rfb2x for: 0 to 10 V; -5 to 5 V; 181 Rfb4x for: -10 to 10V 182 oneOf: 183 - items: 184 - const: 0 185 - enum: [2500000, 5000000, 10000000] 186 - items: 187 - const: -5000000 188 - const: 5000000 189 - items: 190 - const: -10000000 191 - const: 10000000 192 193 - if: 194 properties: 195 compatible: 196 contains: 197 enum: 198 - adi,ad3541r 199 - adi,ad3551r 200 then: 201 properties: 202 channel@1: false 203 channel@0: 204 properties: 205 reg: 206 const: 0 207 208required: 209 - compatible 210 - reg 211 - spi-max-frequency 212 213additionalProperties: false 214 215examples: 216 - | 217 spi { 218 #address-cells = <1>; 219 #size-cells = <0>; 220 ad3552r@0 { 221 compatible = "adi,ad3552r"; 222 reg = <0>; 223 spi-max-frequency = <20000000>; 224 #address-cells = <1>; 225 #size-cells = <0>; 226 channel@0 { 227 reg = <0>; 228 adi,output-range-microvolt = <0 10000000>; 229 }; 230 channel@1 { 231 reg = <1>; 232 custom-output-range-config { 233 adi,gain-offset = <5>; 234 adi,gain-scaling-p = <1>; 235 adi,gain-scaling-n = <2>; 236 adi,rfb-ohms = <1>; 237 }; 238 }; 239 }; 240 }; 241... 242