xref: /linux/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml (revision ae22a94997b8a03dcb3c922857c203246711f9d4) 
1# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
2# Copyright 2019 Analog Devices Inc.
3%YAML 1.2
4---
5$id: http://devicetree.org/schemas/iio/adc/adi,ad7192.yaml#
6$schema: http://devicetree.org/meta-schemas/core.yaml#
7
8title: Analog Devices AD7192 ADC device driver
9
10maintainers:
11  - Michael Hennerich <michael.hennerich@analog.com>
12
13description: |
14  Bindings for the Analog Devices AD7192 ADC device. Datasheet can be
15  found here:
16  https://www.analog.com/media/en/technical-documentation/data-sheets/AD7192.pdf
17
18properties:
19  compatible:
20    enum:
21      - adi,ad7190
22      - adi,ad7192
23      - adi,ad7193
24      - adi,ad7195
25
26  reg:
27    maxItems: 1
28
29  spi-cpol: true
30
31  spi-cpha: true
32
33  clocks:
34    maxItems: 1
35    description: phandle to the master clock (mclk)
36
37  clock-names:
38    items:
39      - const: mclk
40
41  interrupts:
42    maxItems: 1
43
44  dvdd-supply:
45    description: DVdd voltage supply
46
47  avdd-supply:
48    description: AVdd voltage supply
49
50  vref-supply:
51    description: VRef voltage supply
52
53  adi,rejection-60-Hz-enable:
54    description: |
55      This bit enables a notch at 60 Hz when the first notch of the sinc
56      filter is at 50 Hz. When REJ60 is set, a filter notch is placed at
57      60 Hz when the sinc filter first notch is at 50 Hz. This allows
58      simultaneous 50 Hz/ 60 Hz rejection.
59    type: boolean
60
61  adi,refin2-pins-enable:
62    description: |
63      External reference applied between the P1/REFIN2(+) and P0/REFIN2(−) pins.
64    type: boolean
65
66  adi,buffer-enable:
67    description: |
68      Enables the buffer on the analog inputs. If cleared, the analog inputs
69      are unbuffered, lowering the power consumption of the device. If this
70      bit is set, the analog inputs are buffered, allowing the user to place
71      source impedances on the front end without contributing gain errors to
72      the system.
73    type: boolean
74
75  adi,burnout-currents-enable:
76    description: |
77      When this bit is set to 1, the 500 nA current sources in the signal
78      path are enabled. When BURN = 0, the burnout currents are disabled.
79      The burnout currents can be enabled only when the buffer is active
80      and when chop is disabled.
81    type: boolean
82
83  bipolar:
84    description: see Documentation/devicetree/bindings/iio/adc/adc.yaml
85    type: boolean
86
87required:
88  - compatible
89  - reg
90  - clocks
91  - clock-names
92  - interrupts
93  - dvdd-supply
94  - avdd-supply
95  - vref-supply
96  - spi-cpol
97  - spi-cpha
98
99allOf:
100  - $ref: /schemas/spi/spi-peripheral-props.yaml#
101
102unevaluatedProperties: false
103
104examples:
105  - |
106    spi {
107        #address-cells = <1>;
108        #size-cells = <0>;
109
110        adc@0 {
111            compatible = "adi,ad7192";
112            reg = <0>;
113            spi-max-frequency = <1000000>;
114            spi-cpol;
115            spi-cpha;
116            clocks = <&ad7192_mclk>;
117            clock-names = "mclk";
118            interrupts = <25 0x2>;
119            interrupt-parent = <&gpio>;
120            dvdd-supply = <&dvdd>;
121            avdd-supply = <&avdd>;
122            vref-supply = <&vref>;
123
124            adi,refin2-pins-enable;
125            adi,rejection-60-Hz-enable;
126            adi,buffer-enable;
127            adi,burnout-currents-enable;
128        };
129    };
130