xref: /linux/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml (revision 50282fd57bcd3525c9d81eef58df8718e4337c6d) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/i2c/qcom,i2c-geni-qcom.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Qualcomm Geni based QUP I2C Controller
8
9maintainers:
10  - Andy Gross <agross@kernel.org>
11  - Bjorn Andersson <bjorn.andersson@linaro.org>
12
13properties:
14  compatible:
15    enum:
16      - qcom,geni-i2c
17      - qcom,geni-i2c-master-hub
18
19  clocks:
20    minItems: 1
21    maxItems: 2
22
23  clock-names:
24    minItems: 1
25    maxItems: 2
26
27  clock-frequency:
28    default: 100000
29
30  dmas:
31    maxItems: 2
32
33  dma-names:
34    items:
35      - const: tx
36      - const: rx
37
38  interconnects:
39    minItems: 2
40    maxItems: 3
41
42  interconnect-names:
43    minItems: 2
44    maxItems: 3
45
46  interrupts:
47    maxItems: 1
48
49  operating-points-v2: true
50
51  pinctrl-0: true
52  pinctrl-1: true
53
54  pinctrl-names:
55    minItems: 1
56    items:
57      - const: default
58      - const: sleep
59
60  power-domains:
61    maxItems: 1
62
63  reg:
64    maxItems: 1
65
66  required-opps:
67    maxItems: 1
68
69required:
70  - compatible
71  - interrupts
72  - clocks
73  - clock-names
74  - reg
75
76allOf:
77  - $ref: /schemas/i2c/i2c-controller.yaml#
78  - if:
79      properties:
80        compatible:
81          contains:
82            const: qcom,geni-i2c-master-hub
83    then:
84      properties:
85        clocks:
86          minItems: 2
87
88        clock-names:
89          items:
90            - const: se
91            - const: core
92
93        dmas: false
94        dma-names: false
95
96        interconnects:
97          maxItems: 2
98
99        interconnect-names:
100          items:
101            - const: qup-core
102            - const: qup-config
103    else:
104      properties:
105        clocks:
106          maxItems: 1
107
108        clock-names:
109          const: se
110
111        interconnects:
112          minItems: 3
113
114        interconnect-names:
115          items:
116            - const: qup-core
117            - const: qup-config
118            - const: qup-memory
119
120unevaluatedProperties: false
121
122examples:
123  - |
124    #include <dt-bindings/interrupt-controller/arm-gic.h>
125    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
126    #include <dt-bindings/interconnect/qcom,sc7180.h>
127    #include <dt-bindings/power/qcom-rpmpd.h>
128
129    i2c@88000 {
130        compatible = "qcom,geni-i2c";
131        reg = <0x00880000 0x4000>;
132        clock-names = "se";
133        clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
134        pinctrl-names = "default";
135        pinctrl-0 = <&qup_i2c0_default>;
136        interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
137        #address-cells = <1>;
138        #size-cells = <0>;
139        interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
140                        <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
141                        <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
142        interconnect-names = "qup-core", "qup-config", "qup-memory";
143        power-domains = <&rpmhpd SC7180_CX>;
144        required-opps = <&rpmhpd_opp_low_svs>;
145    };
146...
147