1# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/i2c/nuvoton,npcm7xx-i2c.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: nuvoton NPCM7XX I2C Controller 8 9description: | 10 I2C bus controllers of the NPCM series support both master and 11 slave mode. Each controller can switch between master and slave at run time 12 (i.e. IPMB mode). HW FIFO for TX and RX are supported. 13 14maintainers: 15 - Tali Perry <tali.perry1@gmail.com> 16 17properties: 18 compatible: 19 enum: 20 - nuvoton,npcm750-i2c 21 - nuvoton,npcm845-i2c 22 23 reg: 24 maxItems: 1 25 26 interrupts: 27 maxItems: 1 28 29 clocks: 30 maxItems: 1 31 description: Reference clock for the I2C bus 32 33 clock-frequency: 34 description: Desired I2C bus clock frequency in Hz. If not specified, 35 the default 100 kHz frequency will be used. 36 possible values are 100000, 400000 and 1000000. 37 default: 100000 38 enum: [100000, 400000, 1000000] 39 40 nuvoton,sys-mgr: 41 $ref: /schemas/types.yaml#/definitions/phandle 42 description: The phandle of system manager register node. 43 44required: 45 - compatible 46 - reg 47 - interrupts 48 - clocks 49 50allOf: 51 - $ref: /schemas/i2c/i2c-controller.yaml# 52 - if: 53 properties: 54 compatible: 55 contains: 56 const: nuvoton,npcm845-i2c 57 58 then: 59 required: 60 - nuvoton,sys-mgr 61 62unevaluatedProperties: false 63 64examples: 65 - | 66 #include <dt-bindings/clock/nuvoton,npcm7xx-clock.h> 67 #include <dt-bindings/interrupt-controller/arm-gic.h> 68 i2c0: i2c@80000 { 69 reg = <0x80000 0x1000>; 70 clocks = <&clk NPCM7XX_CLK_APB2>; 71 clock-frequency = <100000>; 72 interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; 73 compatible = "nuvoton,npcm750-i2c"; 74 nuvoton,sys-mgr = <&gcr>; 75 }; 76 77... 78