xref: /linux/Documentation/devicetree/bindings/hwmon/adt7475.yaml (revision c532de5a67a70f8533d495f8f2aaa9a0491c3ad0) 
1# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/hwmon/adt7475.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: ADT7475 hwmon sensor
8
9maintainers:
10  - Jean Delvare <jdelvare@suse.com>
11
12description: |
13  The ADT7473, ADT7475, ADT7476, and ADT7490 are thermal monitors and multiple
14  PWN fan controllers.
15
16  They support monitoring and controlling up to four fans (the ADT7490 can only
17  control up to three). They support reading a single on chip temperature
18  sensor and two off chip temperature sensors (the ADT7490 additionally
19  supports measuring up to three current external temperature sensors with
20  series resistance cancellation (SRC)).
21
22  Datasheets:
23  https://www.onsemi.com/pub/Collateral/ADT7473-D.PDF
24  https://www.onsemi.com/pub/Collateral/ADT7475-D.PDF
25  https://www.onsemi.com/pub/Collateral/ADT7476-D.PDF
26  https://www.onsemi.com/pub/Collateral/ADT7490-D.PDF
27
28  Description taken from onsemiconductors specification sheets, with minor
29  rephrasing.
30
31properties:
32  compatible:
33    enum:
34      - adi,adt7473
35      - adi,adt7475
36      - adi,adt7476
37      - adi,adt7490
38
39  reg:
40    maxItems: 1
41
42  adi,pwm-active-state:
43    description: |
44      Integer array, represents the active state of the pwm outputs If set to 0
45      the pwm uses a logic low output for 100% duty cycle. If set to 1 the pwm
46      uses a logic high output for 100% duty cycle.
47    $ref: /schemas/types.yaml#/definitions/uint32-array
48    deprecated: true
49    minItems: 3
50    maxItems: 3
51    items:
52      enum: [0, 1]
53      default: 1
54
55  "#pwm-cells":
56    const: 4
57    description: |
58      Number of cells in a PWM specifier.
59      - 0: The PWM channel
60      - 1: The PWM period in nanoseconds
61           - 90909091 (11 Hz)
62           - 71428571 (14 Hz)
63           - 45454545 (22 Hz)
64           - 34482759 (29 Hz)
65           - 28571429 (35 Hz)
66           - 22727273 (44 Hz)
67           - 17241379 (58 Hz)
68           - 11363636 (88 Hz)
69           - 44444 (22 kHz)
70      - 2: PWM flags 0 or PWM_POLARITY_INVERTED
71      - 3: The default PWM duty cycle in nanoseconds
72
73patternProperties:
74  "^adi,bypass-attenuator-in[0-4]$":
75    description: |
76      Configures bypassing the individual voltage input attenuator. If
77      set to 1 the attenuator is bypassed if set to 0 the attenuator is
78      not bypassed. If the property is absent then the attenuator
79      retains its configuration from the bios/bootloader.
80    $ref: /schemas/types.yaml#/definitions/uint32
81    enum: [0, 1]
82
83  "^adi,pin(5|10)-function$":
84    description: |
85      Configures the function for pin 5 on the adi,adt7473 and adi,adt7475. Or
86      pin 10 on the adi,adt7476 and adi,adt7490.
87    $ref: /schemas/types.yaml#/definitions/string
88    enum:
89      - pwm2
90      - smbalert#
91
92  "^adi,pin(9|14)-function$":
93    description: |
94      Configures the function for pin 9 on the adi,adt7473 and adi,adt7475. Or
95      pin 14 on the adi,adt7476 and adi,adt7490
96    $ref: /schemas/types.yaml#/definitions/string
97    enum:
98      - tach4
99      - therm#
100      - smbalert#
101      - gpio
102
103  "^fan-[0-9]+$":
104    $ref: fan-common.yaml#
105    unevaluatedProperties: false
106
107required:
108  - compatible
109  - reg
110
111additionalProperties: false
112
113examples:
114  - |
115    #include <dt-bindings/pwm/pwm.h>
116    i2c {
117      #address-cells = <1>;
118      #size-cells = <0>;
119
120      pwm: hwmon@2e {
121        compatible = "adi,adt7476";
122        reg = <0x2e>;
123        adi,bypass-attenuator-in0 = <1>;
124        adi,bypass-attenuator-in1 = <0>;
125        adi,pin10-function = "smbalert#";
126        adi,pin14-function = "tach4";
127        #pwm-cells = <4>;
128
129        /* PWMs at 22.5 kHz frequency, 50% duty*/
130        fan-0 {
131          pwms = <&pwm 0 44444 0 22222>;
132        };
133
134        fan-1 {
135          pwms = <&pwm 2 44444 0 22222>;
136        };
137      };
138    };
139