xref: /linux/Documentation/devicetree/bindings/gpio/gpio-stp-xway.yaml (revision ae22a94997b8a03dcb3c922857c203246711f9d4) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/gpio/gpio-stp-xway.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Lantiq SoC Serial To Parallel (STP) GPIO controller
8
9description: |
10  The Serial To Parallel (STP) is found on MIPS based Lantiq socs. It is a
11  peripheral controller used to drive external shift register cascades. At most
12  3 groups of 8 bits can be driven. The hardware is able to allow the DSL modem
13  and Ethernet PHYs to drive some bytes of the cascade automatically.
14
15maintainers:
16  - John Crispin <john@phrozen.org>
17
18properties:
19  $nodename:
20    pattern: "^gpio@[0-9a-f]+$"
21
22  compatible:
23    const: lantiq,gpio-stp-xway
24
25  reg:
26    maxItems: 1
27
28  gpio-controller: true
29
30  "#gpio-cells":
31    description:
32      The first cell is the pin number and the second cell is used to specify
33      consumer flags.
34    const: 2
35
36  lantiq,shadow:
37    description:
38      The default value that we shall assume as already set on the
39      shift register cascade.
40    $ref: /schemas/types.yaml#/definitions/uint32
41    minimum: 0x000000
42    maximum: 0xffffff
43
44  lantiq,groups:
45    description:
46      Set the 3 bit mask to select which of the 3 groups are enabled
47      in the shift register cascade.
48    $ref: /schemas/types.yaml#/definitions/uint32
49    minimum: 0x0
50    maximum: 0x7
51
52  lantiq,dsl:
53    description:
54      The dsl core can control the 2 LSBs of the gpio cascade. This 2 bit
55      property can enable this feature.
56    $ref: /schemas/types.yaml#/definitions/uint32
57    minimum: 0x0
58    maximum: 0x3
59
60  lantiq,rising:
61    description:
62      Use rising instead of falling edge for the shift register.
63    type: boolean
64
65patternProperties:
66  "^lantiq,phy[1-4]$":
67    description:
68      The gphy core can control 3 bits of the gpio cascade. In the xRX200 family
69      phy[1-2] are available, in xRX330 phy[1-3] and in XRX330 phy[1-4].
70    $ref: /schemas/types.yaml#/definitions/uint32
71    minimum: 0x0
72    maximum: 0x7
73
74required:
75  - compatible
76  - reg
77  - gpio-controller
78  - "#gpio-cells"
79
80additionalProperties: false
81
82examples:
83  - |
84    gpio@e100bb0 {
85        compatible = "lantiq,gpio-stp-xway";
86        reg = <0xE100BB0 0x40>;
87        #gpio-cells = <2>;
88        gpio-controller;
89
90        pinctrl-0 = <&stp_pins>;
91        pinctrl-names = "default";
92
93        lantiq,shadow = <0xffffff>;
94        lantiq,groups = <0x7>;
95        lantiq,dsl = <0x3>;
96        lantiq,phy1 = <0x7>;
97        lantiq,phy2 = <0x7>;
98    };
99...
100