xref: /linux/Documentation/devicetree/bindings/fpga/xlnx,fpga-slave-serial.yaml (revision 8c994eff8fcfe8ecb1f1dbebed25b4d7bb75be12) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/fpga/xlnx,fpga-slave-serial.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Xilinx Slave Serial SPI FPGA
8
9maintainers:
10  - Nava kishore Manne <nava.kishore.manne@amd.com>
11
12description: |
13  Xilinx Spartan-6 and 7 Series FPGAs support a method of loading the bitstream
14  over what is referred to as slave serial interface.The slave serial link is
15  not technically SPI, and might require extra circuits in order to play nicely
16  with other SPI slaves on the same bus.
17
18  Datasheets:
19    https://www.xilinx.com/support/documentation/user_guides/ug380.pdf
20    https://www.xilinx.com/support/documentation/user_guides/ug470_7Series_Config.pdf
21    https://www.xilinx.com/support/documentation/application_notes/xapp583-fpga-configuration.pdf
22
23allOf:
24  - $ref: /schemas/spi/spi-peripheral-props.yaml#
25
26properties:
27  compatible:
28    enum:
29      - xlnx,fpga-slave-serial
30
31  spi-cpha: true
32
33  spi-max-frequency:
34    maximum: 60000000
35
36  reg:
37    maxItems: 1
38
39  prog_b-gpios:
40    description:
41      config pin (referred to as PROGRAM_B in the manual)
42    maxItems: 1
43
44  done-gpios:
45    description:
46      config status pin (referred to as DONE in the manual)
47    maxItems: 1
48
49  init-b-gpios:
50    description:
51      initialization status and configuration error pin
52      (referred to as INIT_B in the manual)
53    maxItems: 1
54
55required:
56  - compatible
57  - reg
58  - prog_b-gpios
59  - done-gpios
60  - init-b-gpios
61
62additionalProperties: false
63
64examples:
65  - |
66    #include <dt-bindings/gpio/gpio.h>
67    spi {
68      #address-cells = <1>;
69      #size-cells = <0>;
70      fpga_mgr_spi: fpga-mgr@0 {
71        compatible = "xlnx,fpga-slave-serial";
72        spi-max-frequency = <60000000>;
73        spi-cpha;
74        reg = <0>;
75        prog_b-gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
76        init-b-gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
77        done-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
78      };
79    };
80...
81