1Texas Instruments eDMA 2 3The eDMA3 consists of two components: Channel controller (CC) and Transfer 4Controller(s) (TC). The CC is the main entry for DMA users since it is 5responsible for the DMA channel handling, while the TCs are responsible to 6execute the actual DMA tansfer. 7 8------------------------------------------------------------------------------ 9eDMA3 Channel Controller 10 11Required properties: 12-------------------- 13- compatible: Should be: 14 - "ti,edma3-tpcc" for the channel controller(s) on OMAP, 15 AM33xx and AM43xx SoCs. 16 - "ti,k2g-edma3-tpcc", "ti,edma3-tpcc" for the 17 channel controller(s) on 66AK2G. 18- #dma-cells: Should be set to <2>. The first number is the DMA request 19 number and the second is the TC the channel is serviced on. 20- reg: Memory map of eDMA CC 21- reg-names: "edma3_cc" 22- interrupts: Interrupt lines for CCINT, MPERR and CCERRINT. 23- interrupt-names: "edma3_ccint", "edma3_mperr" and "edma3_ccerrint" 24- ti,tptcs: List of TPTCs associated with the eDMA in the following form: 25 <&tptc_phandle TC_priority_number>. The highest priority is 0. 26 27SoC-specific Required properties: 28-------------------------------- 29The following are mandatory properties for OMAP, AM33xx and AM43xx SoCs only: 30- ti,hwmods: Name of the hwmods associated to the eDMA CC. 31 32The following are mandatory properties for 66AK2G SoCs only: 33- power-domains:Should contain a phandle to a PM domain provider node 34 and an args specifier containing the device id 35 value. This property is as per the binding, 36 Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt 37 38Optional properties: 39------------------- 40- ti,edma-memcpy-channels: List of channels allocated to be used for memcpy, iow 41 these channels will be SW triggered channels. See example. 42- ti,edma-reserved-slot-ranges: PaRAM slot ranges which should not be used by 43 the driver, they are allocated to be used by for example the 44 DSP. See example. 45 46------------------------------------------------------------------------------ 47eDMA3 Transfer Controller 48 49Required properties: 50-------------------- 51- compatible: Should be: 52 - "ti,edma3-tptc" for the transfer controller(s) on OMAP, 53 AM33xx and AM43xx SoCs. 54 - "ti,k2g-edma3-tptc", "ti,edma3-tptc" for the 55 transfer controller(s) on 66AK2G. 56- reg: Memory map of eDMA TC 57- interrupts: Interrupt number for TCerrint. 58 59SoC-specific Required properties: 60-------------------------------- 61The following are mandatory properties for OMAP, AM33xx and AM43xx SoCs only: 62- ti,hwmods: Name of the hwmods associated to the eDMA TC. 63 64The following are mandatory properties for 66AK2G SoCs only: 65- power-domains:Should contain a phandle to a PM domain provider node 66 and an args specifier containing the device id 67 value. This property is as per the binding, 68 Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt 69 70Optional properties: 71------------------- 72- interrupt-names: "edma3_tcerrint" 73 74------------------------------------------------------------------------------ 75Examples: 76 771. 78edma: edma@49000000 { 79 compatible = "ti,edma3-tpcc"; 80 ti,hwmods = "tpcc"; 81 reg = <0x49000000 0x10000>; 82 reg-names = "edma3_cc"; 83 interrupts = <12 13 14>; 84 interrupt-names = "edma3_ccint", "edma3_mperr", "edma3_ccerrint"; 85 dma-requests = <64>; 86 #dma-cells = <2>; 87 88 ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 7>, <&edma_tptc2 0>; 89 90 /* Channel 20 and 21 is allocated for memcpy */ 91 ti,edma-memcpy-channels = <20 21>; 92 /* The following PaRAM slots are reserved: 35-44 and 100-109 */ 93 ti,edma-reserved-slot-ranges = <35 10>, <100 10>; 94}; 95 96edma_tptc0: tptc@49800000 { 97 compatible = "ti,edma3-tptc"; 98 ti,hwmods = "tptc0"; 99 reg = <0x49800000 0x100000>; 100 interrupts = <112>; 101 interrupt-names = "edm3_tcerrint"; 102}; 103 104edma_tptc1: tptc@49900000 { 105 compatible = "ti,edma3-tptc"; 106 ti,hwmods = "tptc1"; 107 reg = <0x49900000 0x100000>; 108 interrupts = <113>; 109 interrupt-names = "edm3_tcerrint"; 110}; 111 112edma_tptc2: tptc@49a00000 { 113 compatible = "ti,edma3-tptc"; 114 ti,hwmods = "tptc2"; 115 reg = <0x49a00000 0x100000>; 116 interrupts = <114>; 117 interrupt-names = "edm3_tcerrint"; 118}; 119 120sham: sham@53100000 { 121 compatible = "ti,omap4-sham"; 122 ti,hwmods = "sham"; 123 reg = <0x53100000 0x200>; 124 interrupts = <109>; 125 /* DMA channel 36 executed on eDMA TC0 - low priority queue */ 126 dmas = <&edma 36 0>; 127 dma-names = "rx"; 128}; 129 130mcasp0: mcasp@48038000 { 131 compatible = "ti,am33xx-mcasp-audio"; 132 ti,hwmods = "mcasp0"; 133 reg = <0x48038000 0x2000>, 134 <0x46000000 0x400000>; 135 reg-names = "mpu", "dat"; 136 interrupts = <80>, <81>; 137 interrupt-names = "tx", "rx"; 138 /* DMA channels 8 and 9 executed on eDMA TC2 - high priority queue */ 139 dmas = <&edma 8 2>, 140 <&edma 9 2>; 141 dma-names = "tx", "rx"; 142}; 143 1442. 145edma1: edma@2728000 { 146 compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc"; 147 reg = <0x02728000 0x8000>; 148 reg-names = "edma3_cc"; 149 interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>, 150 <GIC_SPI 219 IRQ_TYPE_EDGE_RISING>, 151 <GIC_SPI 220 IRQ_TYPE_EDGE_RISING>; 152 interrupt-names = "edma3_ccint", "emda3_mperr", 153 "edma3_ccerrint"; 154 dma-requests = <64>; 155 #dma-cells = <2>; 156 157 ti,tptcs = <&edma1_tptc0 7>, <&edma1_tptc1 0>; 158 159 /* 160 * memcpy is disabled, can be enabled with: 161 * ti,edma-memcpy-channels = <12 13 14 15>; 162 * for example. 163 */ 164 165 power-domains = <&k2g_pds 0x4f>; 166}; 167 168edma1_tptc0: tptc@27b0000 { 169 compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc"; 170 reg = <0x027b0000 0x400>; 171 power-domains = <&k2g_pds 0x4f>; 172}; 173 174edma1_tptc1: tptc@27b8000 { 175 compatible = "ti, k2g-edma3-tptc", "ti,edma3-tptc"; 176 reg = <0x027b8000 0x400>; 177 power-domains = <&k2g_pds 0x4f>; 178}; 179 180mmc0: mmc@23000000 { 181 compatible = "ti,k2g-hsmmc", "ti,omap4-hsmmc"; 182 reg = <0x23000000 0x400>; 183 interrupts = <GIC_SPI 96 IRQ_TYPE_EDGE_RISING>; 184 dmas = <&edma1 24 0>, <&edma1 25 0>; 185 dma-names = "tx", "rx"; 186 bus-width = <4>; 187 ti,needs-special-reset; 188 no-1-8-v; 189 max-frequency = <96000000>; 190 power-domains = <&k2g_pds 0xb>; 191 clocks = <&k2g_clks 0xb 1>, <&k2g_clks 0xb 2>; 192 clock-names = "fck", "mmchsdb_fck"; 193}; 194 195------------------------------------------------------------------------------ 196DEPRECATED binding, new DTS files must use the ti,edma3-tpcc/ti,edma3-tptc 197binding. 198 199Required properties: 200- compatible : "ti,edma3" 201- #dma-cells: Should be set to <1> 202 Clients should use a single channel number per DMA request. 203- reg: Memory map for accessing module 204- interrupts: Exactly 3 interrupts need to be specified in the order: 205 1. Transfer completion interrupt. 206 2. Memory protection interrupt. 207 3. Error interrupt. 208Optional properties: 209- ti,hwmods: Name of the hwmods associated to the EDMA 210- ti,edma-xbar-event-map: Crossbar event to channel map 211 212Deprecated properties: 213Listed here in case one wants to boot an old kernel with new DTB. These 214properties might need to be added to the new DTS files. 215- ti,edma-regions: Number of regions 216- ti,edma-slots: Number of slots 217- dma-channels: Specify total DMA channels per CC 218 219Example: 220 221edma: edma@49000000 { 222 reg = <0x49000000 0x10000>; 223 interrupt-parent = <&intc>; 224 interrupts = <12 13 14>; 225 compatible = "ti,edma3"; 226 ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2"; 227 #dma-cells = <1>; 228 ti,edma-xbar-event-map = /bits/ 16 <1 12 229 2 13>; 230}; 231