xref: /linux/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml (revision 4b132aacb0768ac1e652cf517097ea6f237214b9) 
1# SPDX-License-Identifier: GPL-2.0-only
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/dma/snps,dma-spear1340.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Synopsys Designware DMA Controller
8
9maintainers:
10  - Viresh Kumar <vireshk@kernel.org>
11  - Andy Shevchenko <andriy.shevchenko@linux.intel.com>
12
13allOf:
14  - $ref: dma-controller.yaml#
15
16properties:
17  compatible:
18    oneOf:
19      - const: snps,dma-spear1340
20      - items:
21          - enum:
22              - renesas,r9a06g032-dma
23          - const: renesas,rzn1-dma
24
25
26  "#dma-cells":
27    minimum: 3
28    maximum: 4
29    description: |
30      First cell is a phandle pointing to the DMA controller. Second one is
31      the DMA request line number. Third cell is the memory master identifier
32      for transfers on dynamically allocated channel. Fourth cell is the
33      peripheral master identifier for transfers on an allocated channel. Fifth
34      cell is an optional mask of the DMA channels permitted to be allocated
35      for the corresponding client device.
36
37  reg:
38    maxItems: 1
39
40  interrupts:
41    maxItems: 1
42
43  clocks:
44    maxItems: 1
45
46  clock-names:
47    description: AHB interface reference clock.
48    const: hclk
49
50  dma-channels:
51    description: |
52      Number of DMA channels supported by the controller. In case if
53      not specified the driver will try to auto-detect this and
54      the rest of the optional parameters.
55    minimum: 1
56    maximum: 8
57
58  dma-requests:
59    minimum: 1
60    maximum: 16
61
62  dma-masters:
63    $ref: /schemas/types.yaml#/definitions/uint32
64    description: |
65      Number of DMA masters supported by the controller. In case if
66      not specified the driver will try to auto-detect this and
67      the rest of the optional parameters.
68    minimum: 1
69    maximum: 4
70
71  chan_allocation_order:
72    $ref: /schemas/types.yaml#/definitions/uint32
73    description: |
74      DMA channels allocation order specifier. Zero means ascending order
75      (first free allocated), while one - descending (last free allocated).
76    default: 0
77    enum: [0, 1]
78
79  chan_priority:
80    $ref: /schemas/types.yaml#/definitions/uint32
81    description: |
82      DMA channels priority order. Zero means ascending channels priority
83      so the very first channel has the highest priority. While 1 means
84      descending priority (the last channel has the highest priority).
85    default: 0
86    enum: [0, 1]
87
88  block_size:
89    $ref: /schemas/types.yaml#/definitions/uint32
90    description: Maximum block size supported by the DMA controller.
91    enum: [3, 7, 15, 31, 63, 127, 255, 511, 1023, 2047, 4095]
92
93  data-width:
94    $ref: /schemas/types.yaml#/definitions/uint32-array
95    description: Data bus width per each DMA master in bytes.
96    minItems: 1
97    maxItems: 4
98    items:
99      enum: [4, 8, 16, 32]
100
101  data_width:
102    $ref: /schemas/types.yaml#/definitions/uint32-array
103    deprecated: true
104    description: |
105      Data bus width per each DMA master in (2^n * 8) bits. This property is
106      deprecated. It' usage is discouraged in favor of data-width one. Moreover
107      the property incorrectly permits to define data-bus width of 8 and 16
108      bits, which is impossible in accordance with DW DMAC IP-core data book.
109    minItems: 1
110    maxItems: 4
111    items:
112      enum:
113        - 0 # 8 bits
114        - 1 # 16 bits
115        - 2 # 32 bits
116        - 3 # 64 bits
117        - 4 # 128 bits
118        - 5 # 256 bits
119      default: 0
120
121  multi-block:
122    $ref: /schemas/types.yaml#/definitions/uint32-array
123    description: |
124      LLP-based multi-block transfer supported by hardware per
125      each DMA channel.
126    minItems: 1
127    maxItems: 8
128    items:
129      enum: [0, 1]
130      default: 1
131
132  snps,max-burst-len:
133    $ref: /schemas/types.yaml#/definitions/uint32-array
134    description: |
135      Maximum length of the burst transactions supported by the controller.
136      This property defines the upper limit of the run-time burst setting
137      (CTLx.SRC_MSIZE/CTLx.DST_MSIZE fields) so the allowed burst length
138      will be from 1 to max-burst-len words. It's an array property with one
139      cell per channel in the units determined by the value set in the
140      CTLx.SRC_TR_WIDTH/CTLx.DST_TR_WIDTH fields (data width).
141    minItems: 1
142    maxItems: 8
143    items:
144      enum: [4, 8, 16, 32, 64, 128, 256]
145      default: 256
146
147  snps,dma-protection-control:
148    $ref: /schemas/types.yaml#/definitions/uint32
149    description: |
150      Bits one-to-one passed to the AHB HPROT[3:1] bus. Each bit setting
151      indicates the following features: bit 0 - privileged mode,
152      bit 1 - DMA is bufferable, bit 2 - DMA is cacheable.
153    default: 0
154    minimum: 0
155    maximum: 7
156
157unevaluatedProperties: false
158
159required:
160  - compatible
161  - "#dma-cells"
162  - reg
163  - interrupts
164
165examples:
166  - |
167    dma-controller@fc000000 {
168      compatible = "snps,dma-spear1340";
169      reg = <0xfc000000 0x1000>;
170      interrupt-parent = <&vic1>;
171      interrupts = <12>;
172
173      dma-channels = <8>;
174      dma-requests = <16>;
175      dma-masters = <4>;
176      #dma-cells = <3>;
177
178      chan_allocation_order = <1>;
179      chan_priority = <1>;
180      block_size = <0xfff>;
181      data-width = <8 8>;
182      multi-block = <0 0 0 0 0 0 0 0>;
183      snps,max-burst-len = <16 16 4 4 4 4 4 4>;
184    };
185...
186