1Texas Instruments OMAP3 Display Subsystem 2========================================= 3 4See Documentation/devicetree/bindings/display/ti/ti,omap-dss.txt for generic 5description about OMAP Display Subsystem bindings. 6 7DSS Core 8-------- 9 10Required properties: 11- compatible: "ti,omap3-dss" 12- reg: address and length of the register space 13- ti,hwmods: "dss_core" 14- clocks: handle to fclk 15- clock-names: "fck" 16 17Optional nodes: 18- Video ports: 19 - Port 0: DPI output 20 - Port 1: SDI output 21 22DPI Endpoint required properties: 23- data-lines: number of lines used 24 25SDI Endpoint required properties: 26- datapairs: number of datapairs used 27 28 29DISPC 30----- 31 32Required properties: 33- compatible: "ti,omap3-dispc" 34- reg: address and length of the register space 35- ti,hwmods: "dss_dispc" 36- interrupts: the DISPC interrupt 37- clocks: handle to fclk 38- clock-names: "fck" 39 40 41RFBI 42---- 43 44Required properties: 45- compatible: "ti,omap3-rfbi" 46- reg: address and length of the register space 47- ti,hwmods: "dss_rfbi" 48- clocks: handles to fclk and iclk 49- clock-names: "fck", "ick" 50 51 52VENC 53---- 54 55Required properties: 56- compatible: "ti,omap3-venc" 57- reg: address and length of the register space 58- ti,hwmods: "dss_venc" 59- vdda-supply: power supply for DAC 60- clocks: handle to fclk 61- clock-names: "fck" 62 63VENC Endpoint required properties: 64- ti,invert-polarity: invert the polarity of the video signal 65- ti,channels: 1 for composite, 2 for s-video 66 67 68DSI 69--- 70 71Required properties: 72- compatible: "ti,omap3-dsi" 73- reg: addresses and lengths of the register spaces for 'proto', 'phy' and 'pll' 74- reg-names: "proto", "phy", "pll" 75- interrupts: the DSI interrupt line 76- ti,hwmods: "dss_dsi1" 77- vdd-supply: power supply for DSI 78- clocks: handles to fclk and pll clock 79- clock-names: "fck", "sys_clk" 80 81DSI Endpoint required properties: 82- lanes: list of pin numbers for the DSI lanes: CLK+, CLK-, DATA0+, DATA0-, 83 DATA1+, DATA1-, ... 84