xref: /linux/Documentation/devicetree/bindings/display/samsung/samsung,fimd.yaml (revision 3d0fe49454652117522f60bfbefb978ba0e5300b) 
1# SPDX-License-Identifier: GPL-2.0-only
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/display/samsung/samsung,fimd.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Samsung S3C/S5P/Exynos SoC Fully Interactive Mobile Display (FIMD)
8
9maintainers:
10  - Inki Dae <inki.dae@samsung.com>
11  - Seung-Woo Kim <sw0312.kim@samsung.com>
12  - Kyungmin Park <kyungmin.park@samsung.com>
13  - Krzysztof Kozlowski <krzk@kernel.org>
14
15properties:
16  compatible:
17    enum:
18      - samsung,s3c2443-fimd
19      - samsung,s3c6400-fimd
20      - samsung,s5pv210-fimd
21      - samsung,exynos3250-fimd
22      - samsung,exynos4210-fimd
23      - samsung,exynos5250-fimd
24      - samsung,exynos5420-fimd
25
26  '#address-cells':
27    const: 1
28
29  clocks:
30    maxItems: 2
31
32  clock-names:
33    items:
34      - const: sclk_fimd
35      - const: fimd
36
37  display-timings:
38    $ref: ../panel/display-timings.yaml#
39
40  i80-if-timings:
41    type: object
42    additionalProperties: false
43    description: |
44      Timing configuration for lcd i80 interface support.
45      The parameters are defined as::
46      VCLK(internal)  __|??????|_____|??????|_____|??????|_____|??????|_____|??
47                        :            :            :            :            :
48      Address Output  --:<XXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XX
49                        | cs-setup+1 |            :            :            :
50                        |<---------->|            :            :            :
51      Chip Select     ???????????????|____________:____________:____________|??
52                                     | wr-setup+1 |            | wr-hold+1  |
53                                     |<---------->|            |<---------->|
54      Write Enable    ????????????????????????????|____________|???????????????
55                                                  | wr-active+1|
56                                                  |<---------->|
57      Video Data      ----------------------------<XXXXXXXXXXXXXXXXXXXXXXXXX>--
58
59    properties:
60      cs-setup:
61        $ref: /schemas/types.yaml#/definitions/uint32
62        description:
63          Clock cycles for the active period of address signal is enabled until
64          chip select is enabled.
65        default: 0
66
67      wr-active:
68        $ref: /schemas/types.yaml#/definitions/uint32
69        description:
70          Clock cycles for the active period of CS is enabled.
71        default: 1
72
73      wr-hold:
74        $ref: /schemas/types.yaml#/definitions/uint32
75        description:
76          Clock cycles for the active period of CS is disabled until write
77          signal is disabled.
78        default: 0
79
80      wr-setup:
81        $ref: /schemas/types.yaml#/definitions/uint32
82        description:
83          Clock cycles for the active period of CS signal is enabled until
84          write signal is enabled.
85        default: 0
86
87  iommus:
88    minItems: 1
89    maxItems: 2
90
91  iommu-names:
92    items:
93      - const: m0
94      - const: m1
95
96  interrupts:
97    items:
98      - description: FIFO level
99      - description: VSYNC
100      - description: LCD system
101
102  interrupt-names:
103    items:
104      - const: fifo
105      - const: vsync
106      - const: lcd_sys
107
108  power-domains:
109    maxItems: 1
110
111  reg:
112    maxItems: 1
113
114  samsung,invert-vden:
115    type: boolean
116    description:
117      Video enable signal is inverted.
118
119  samsung,invert-vclk:
120    type: boolean
121    description:
122      Video clock signal is inverted.
123
124  samsung,sysreg:
125    $ref: /schemas/types.yaml#/definitions/phandle
126    description:
127      Phandle to System Register syscon.
128
129  '#size-cells':
130    const: 0
131
132patternProperties:
133  "^port@[0-4]+$":
134    $ref: /schemas/graph.yaml#/properties/port
135    description: |
136      Contains ports with port with index::
137       0 - for CAMIF0 input,
138       1 - for CAMIF1 input,
139       2 - for CAMIF2 input,
140       3 - for parallel output,
141       4 - for write-back interface
142
143required:
144  - compatible
145  - clocks
146  - clock-names
147  - interrupts
148  - interrupt-names
149  - reg
150
151allOf:
152  - if:
153      properties:
154        compatible:
155          contains:
156            const: samsung,exynos5420-fimd
157    then:
158      properties:
159        iommus:
160          minItems: 2
161          maxItems: 2
162
163additionalProperties: false
164
165examples:
166  - |
167    #include <dt-bindings/clock/exynos4.h>
168
169    fimd@11c00000 {
170        compatible = "samsung,exynos4210-fimd";
171        interrupt-parent = <&combiner>;
172        reg = <0x11c00000 0x20000>;
173        interrupt-names = "fifo", "vsync", "lcd_sys";
174        interrupts = <11 0>, <11 1>, <11 2>;
175        clocks = <&clock CLK_SCLK_FIMD0>, <&clock CLK_FIMD0>;
176        clock-names = "sclk_fimd", "fimd";
177        power-domains = <&pd_lcd0>;
178        iommus = <&sysmmu_fimd0>;
179        samsung,sysreg = <&sys_reg>;
180
181        #address-cells = <1>;
182        #size-cells = <0>;
183
184        samsung,invert-vden;
185        samsung,invert-vclk;
186
187        pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
188        pinctrl-names = "default";
189
190        port@3 {
191            reg = <3>;
192
193            fimd_dpi_ep: endpoint {
194                remote-endpoint = <&lcd_ep>;
195            };
196        };
197    };
198