xref: /linux/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml (revision 3daee2e4b3568f0ed88b0598df96547fcf21cb9b) 
1# SPDX-License-Identifier: GPL-2.0
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/display/panel/raydium,rm67191.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Raydium RM67171 OLED LCD panel with MIPI-DSI protocol
8
9maintainers:
10  - Robert Chiras <robert.chiras@nxp.com>
11
12allOf:
13  - $ref: panel-common.yaml#
14
15properties:
16  compatible:
17    const: raydium,rm67191
18
19  reg:
20    maxItems: 1
21
22  port: true
23  reset-gpios: true
24  width-mm: true
25  height-mm: true
26
27  dsi-lanes:
28    description: Number of DSI lanes to be used must be <3> or <4>
29    $ref: /schemas/types.yaml#/definitions/uint32
30    enum: [3, 4]
31
32  v3p3-supply:
33    description: phandle to 3.3V regulator that powers the VDD_3V3 pin
34
35  v1p8-supply:
36    description: phandle to 1.8V regulator that powers the VDD_1V8 pin
37
38  video-mode:
39    description: |
40      0 - burst-mode
41      1 - non-burst with sync event
42      2 - non-burst with sync pulse
43    $ref: /schemas/types.yaml#/definitions/uint32
44    enum: [0, 1, 2]
45
46required:
47  - compatible
48  - reg
49  - dsi-lanes
50  - port
51
52additionalProperties: false
53
54examples:
55  - |
56    #include <dt-bindings/gpio/gpio.h>
57
58    dsi {
59        #address-cells = <1>;
60        #size-cells = <0>;
61
62        panel@0 {
63            compatible = "raydium,rm67191";
64            reg = <0>;
65            reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
66            dsi-lanes = <4>;
67            width-mm = <68>;
68            height-mm = <121>;
69            video-mode = <1>;
70
71            port {
72                panel_in: endpoint {
73                    remote-endpoint = <&mipi_out>;
74                };
75            };
76        };
77    };
78
79...
80