xref: /linux/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml (revision 8f447694c23a432b2e9cfe67fb2651f8f6655bfd) 
1# SPDX-License-Identifier: GPL-2.0
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/display/panel/olimex,lcd-olinuxino.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Olimex Ltd. LCD-OLinuXino bridge panel.
8
9maintainers:
10  - Stefan Mavrodiev <stefan@olimex.com>
11
12description: |
13  This device can be used as bridge between a host controller and LCD panels.
14  Currently supported LCDs are:
15    - LCD-OLinuXino-4.3TS
16    - LCD-OLinuXino-5
17    - LCD-OLinuXino-7
18    - LCD-OLinuXino-10
19
20  The panel itself contains:
21    - AT24C16C EEPROM holding panel identification and timing requirements
22    - AR1021 resistive touch screen controller (optional)
23    - FT5x6 capacitive touch screen controller (optional)
24    - GT911/GT928 capacitive touch screen controller (optional)
25
26  The above chips share same I2C bus. The EEPROM is factory preprogrammed with
27  device information (id, serial, etc.) and timing requirements.
28
29  Touchscreen bingings can be found in these files:
30    - input/touchscreen/goodix.yaml
31    - input/touchscreen/edt-ft5x06.txt
32    - input/touchscreen/ar1021.txt
33
34allOf:
35  - $ref: panel-common.yaml#
36
37properties:
38  compatible:
39    const: olimex,lcd-olinuxino
40
41  backlight: true
42  enable-gpios: true
43  power-supply: true
44  reg: true
45
46required:
47  - compatible
48  - reg
49  - power-supply
50
51additionalProperties: false
52
53examples:
54  - |
55    #include <dt-bindings/gpio/gpio.h>
56
57    i2c {
58        #address-cells = <1>;
59        #size-cells = <0>;
60
61        panel@50 {
62            compatible = "olimex,lcd-olinuxino";
63            reg = <0x50>;
64            power-supply = <&reg_vcc5v0>;
65            enable-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>;
66            backlight = <&backlight>;
67        };
68    };
69
70...
71