xref: /linux/Documentation/devicetree/bindings/display/panel/jdi,lpm102a188a.yaml (revision e7d759f31ca295d589f7420719c311870bb3166f) 
1# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/display/panel/jdi,lpm102a188a.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: JDI LPM102A188A 2560x1800 10.2" DSI Panel
8
9maintainers:
10  - Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
11
12description: |
13  This panel requires a dual-channel DSI host to operate. It supports two modes:
14  - left-right: each channel drives the left or right half of the screen
15  - even-odd: each channel drives the even or odd lines of the screen
16
17  Each of the DSI channels controls a separate DSI peripheral. The peripheral
18  driven by the first link (DSI-LINK1) is considered the primary peripheral
19  and controls the device. The 'link2' property contains a phandle to the
20  peripheral driven by the second link (DSI-LINK2).
21
22allOf:
23  - $ref: panel-common.yaml#
24
25properties:
26  compatible:
27    const: jdi,lpm102a188a
28
29  reg: true
30  enable-gpios: true
31  reset-gpios: true
32  power-supply: true
33  backlight: true
34
35  ddi-supply:
36    description: The regulator that provides IOVCC (1.8V).
37
38  link2:
39    $ref: /schemas/types.yaml#/definitions/phandle
40    description: |
41      phandle to the DSI peripheral on the secondary link. Note that the
42      presence of this property marks the containing node as DSI-LINK1.
43
44required:
45  - compatible
46  - reg
47
48if:
49  required:
50    - link2
51then:
52  required:
53    - power-supply
54    - ddi-supply
55    - enable-gpios
56    - reset-gpios
57
58additionalProperties: false
59
60examples:
61  - |
62    #include <dt-bindings/gpio/gpio.h>
63    #include <dt-bindings/gpio/tegra-gpio.h>
64
65    dsia: dsi@54300000 {
66        #address-cells = <1>;
67        #size-cells = <0>;
68        reg = <0x0 0x54300000 0x0 0x00040000>;
69
70        link2: panel@0 {
71            compatible = "jdi,lpm102a188a";
72            reg = <0>;
73        };
74    };
75
76    dsib: dsi@54400000{
77        #address-cells = <1>;
78        #size-cells = <0>;
79        reg = <0x0 0x54400000 0x0 0x00040000>;
80        nvidia,ganged-mode = <&dsia>;
81
82        link1: panel@0 {
83            compatible = "jdi,lpm102a188a";
84            reg = <0>;
85            power-supply = <&pplcd_vdd>;
86            ddi-supply = <&pp1800_lcdio>;
87            enable-gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
88            reset-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
89            link2 = <&link2>;
90            backlight = <&backlight>;
91        };
92    };
93
94...
95