1# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/display/msm/qcom,msm8998-dpu.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Qualcomm Display DPU on MSM8998 8 9maintainers: 10 - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> 11 12$ref: /schemas/display/msm/dpu-common.yaml# 13 14properties: 15 compatible: 16 const: qcom,msm8998-dpu 17 18 reg: 19 items: 20 - description: Address offset and size for mdp register set 21 - description: Address offset and size for regdma register set 22 - description: Address offset and size for vbif register set 23 - description: Address offset and size for non-realtime vbif register set 24 25 reg-names: 26 items: 27 - const: mdp 28 - const: regdma 29 - const: vbif 30 - const: vbif_nrt 31 32 clocks: 33 items: 34 - description: Display ahb clock 35 - description: Display axi clock 36 - description: Display mem-noc clock 37 - description: Display core clock 38 - description: Display vsync clock 39 40 clock-names: 41 items: 42 - const: iface 43 - const: bus 44 - const: mnoc 45 - const: core 46 - const: vsync 47 48required: 49 - compatible 50 - reg 51 - reg-names 52 - clocks 53 - clock-names 54 55unevaluatedProperties: false 56 57examples: 58 - | 59 #include <dt-bindings/clock/qcom,mmcc-msm8998.h> 60 #include <dt-bindings/power/qcom-rpmpd.h> 61 62 display-controller@c901000 { 63 compatible = "qcom,msm8998-dpu"; 64 reg = <0x0c901000 0x8f000>, 65 <0x0c9a8e00 0xf0>, 66 <0x0c9b0000 0x2008>, 67 <0x0c9b8000 0x1040>; 68 reg-names = "mdp", "regdma", "vbif", "vbif_nrt"; 69 70 clocks = <&mmcc MDSS_AHB_CLK>, 71 <&mmcc MDSS_AXI_CLK>, 72 <&mmcc MNOC_AHB_CLK>, 73 <&mmcc MDSS_MDP_CLK>, 74 <&mmcc MDSS_VSYNC_CLK>; 75 clock-names = "iface", "bus", "mnoc", "core", "vsync"; 76 77 interrupt-parent = <&mdss>; 78 interrupts = <0>; 79 operating-points-v2 = <&mdp_opp_table>; 80 power-domains = <&rpmpd MSM8998_VDDMX>; 81 82 ports { 83 #address-cells = <1>; 84 #size-cells = <0>; 85 86 port@0 { 87 reg = <0>; 88 endpoint { 89 remote-endpoint = <&dsi0_in>; 90 }; 91 }; 92 93 port@1 { 94 reg = <1>; 95 endpoint { 96 remote-endpoint = <&dsi1_in>; 97 }; 98 }; 99 }; 100 }; 101... 102